Traxxas

This is the Traxxas Aluminum Shock Caps (2) (Big Bore Shocks) Replacement aluminum shock caps for Traxxas Big Bore shocks. (2) Caps do not fit Ultra Shocks. Accessory Part ForDrag Slash 1967...

This is the Traxxas Big Bore Shock Cylinder (Long) (1) Replacement long aluminum shock cylinder for Traxxas Big Bore Shocks. Accessory Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed...

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas Expander Box Seal Kit Refresh your Telemetry Expander Module with this seal kit. Includes o-ring, seals, and silicone grease

This is the Traxxas Aluminum (Middle) (Red-Anodized) Servo Case - For 2255 Servo Replacement red aluminum middle case for 2255 servos. Accessory Part ForRustler 4X4Bandit VXLBanditDrag Slash 1967...

This is the Traxxas Aluminum (Middle) (Blue-Anodized) Servo Case - For 2250 Servo Replacement blue aluminum middle case for 2250 servos. Accessory Part ForRustler 4X4Bandit VXLBanditDrag Slash 1967...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix,...

This is the Traxxas Assembled Front LED Light Bar for the Slash and Stampede models. 2WD Slash - Requires front bumper #5835X2WD Stampede - Requires front bumper #36352WD Bigfoot - Requires front...

This is the Traxxas Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs). This is Traxxas part number 6895Part Number: 6895 / TRA6895Fits1/10 RallySlash 4x4...

This is the Traxxas 12mm Hex, (Blue-Anodized) 6061-T6 Aluminum Wheel Adaptors with (4) 3x10 Screw Pins and 0.25 inch Drill Bit (For 6mm Shafts) 12 mm blue-anodized aluminum hex adapters feature a 6...

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Telemetry Expander Mount 6555 for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Jato vehicles. This part makes it possible to mount the #6550 Telemetry Expander Module on these...

This is the Motor Mount for the Traxxas Slash 4x4. FEATURES Hardened plastic constructionBlack in color INCLUDESOne motor mount assembled with a 3x6mm flat head machine screwOne 3mm...

This is a Traxxas Front Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on...

These are the 39mm Turnbuckle Camber Links for the Traxxas Stampede and Rustler VXL. FEATURES Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDESTwo...

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. Replace your non-adjustable camber links with these 49 mm (82 mm center to center) metal...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -20% Rate, Orange (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is the Traxxas Shock Oil Bottle (60cc) Create your own custom shock oil weights by combining different silicone shock oils in this mixing bottle.

This is the Traxxas Battery door TQ 2.4 transmitter (Replacement for #6516, 6517 Transmitter) Replacement battery door for 6516, 6517, 6528, 6529, and 6530 TQ transmitters Replacement Part For1/16...

This is the Traxxas Double-sided adhesive tape (25mm x 25mm) Two double-sided 25 mm x 25 mm adhesive foam blocks for mounting radio gear. Replacement Part ForBIGFOOT No. 1 Officially Licensed...

This is the Traxxas Rear Bumper & Rear Bumper Mount for LED Light Kit Installation on the Slash 4WD   Replacement part forSlash 4X4 Accessory part forSlash 4X4 UltimateSlash 4X4 VXL

This is the Traxxas Front Bumper and Bumper Support for LED Light Kit Installation on the Slash 4WD   Replacement part forSlash 4X4 Accessory part forSlash 4X4 UltimateSlash 4X4 VXL

This is the Traxxas Y-Harness: BEC to LED Light Set. Replacement Part forBanditBigfootRustlerSlashSlash 4x4Stampede Stampede 4x4 Accessory Part forBandit VXLRustler 4x4 VXLRustler VXLSlash 4x4...

This is the Traxxas Front Bulkhead for 1/10 Slash 4x4 trucks with the low-CG chassis, Rustler 4x4, and 1/10 Rally vehicles. Stock Replacement On1/10 Ford Fiesta ST Rally1/10 RallyRustler 4x4 Brushed...

This is the Traxxas 1/10 Slash 4x4 Green Pre-Painted Body with Decals.  The body comes painted, trimmed, and ready to install! Accessory Part ForSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL...

This is the Traxxas Differential Gear Set for the #6780 center diff.   Replacement spider gear set for the 6780 center differential and Drag Slash differential. Includes (4) Spider Gears(2)...

These are the Traxxas Hardened Steel Center Differential Output Gears (2) for use in the #6780 metal center diff unit for the Rustler 4x4, Slash 4x4, and Stampede 4x4 trucks.

This is the Traxxas Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4) Replacement aluminum housing...

This is the Traxxas 54-Tooth 0.8M Steel Spur Gear for use on the #6780 center differential.  The 54-tooth steel spur gear (32-pitch) fits the 6780 center differential. Traxxas spur gears let you...

These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 73mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for...

These are the Traxxas TUBES Green-Anodized 7075-T6 Aluminum 83mm Camber Links.  The TUBES are super light, yet stronger than titanium due to their design, making them an awesome upgrade for...

This is the Traxxas Velineon 3500 VXL Brushless Motor Endbell Cover.  This is the standard replacement for the 1/10 VXL brushless motor.  If your original is lost or damaged, replace it to...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag...

This is a pair of Traxxas Blue Aluminum GTR Long Front Shocks with PTFE-Coated Bodies and TiNi Shock Shafts.  These come assembled without springs.  Shock oil is also included. 1/10 scale...

This the Traxxas Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Upgrade your slipper shaft with this tough 6160-T6...

These are the Traxxas 1/10 Slash BFGoodrich Tires on Black Chrome Split Spoke Wheels for 4WD Front/Rear and 2WD Rear.  The tires are pre-mounted on wheels with 12mm hexes. Stock Replacement...