Traxxas

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for...

This is the Traxxas Stub axles, rear, heavy duty (2)/pins (2). This is Traxxas part number 6853XPart Number: 6853X / TRA6853XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...

These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss...

These are Traxxas 2.5x31.5mm Stainless Steel King Pins with E-clips for the electric Rustler and Stampede. Replace the stock screw pins with these heavy-duty steel suspension pins that are...

This is a Traxxas Revo 2.5 and 3.3 Forward Only Conversion Kit.  Because you eliminate the reverse gears, there is less rotating mass in the transmission, which lets the truck...

These are the Traxxas Rustler 4x4 Talon Extreme Tires Mounted on Black Wheels. These are pre-glued with foam inserts installed, making them a direct bolt-on for the Rustler 4x4 trucks...

This is the Traxxas Steel Top Drive Gear for the Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles.FitsBandit XL-5 & VXLRustler XL-5 & VXLSlash 2WD XL-5 & VXLStampede 2WD XL-5 & VXL

This is the Traxxas Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Includes aluminum friction pads...

This is the Traxxas Blue Aluminum Turnbuckle set for the Rustler, Stampede 2WD, Stampede 4x4, and Slash 4x4 trucks.FEATURES: Anodized aluminum construction Blue in color Black nylon ball...

These are the Traxxas E-Revo 2 Machined Steel Drive Cups and 4x17mm Screw Pins (2). Each package includes two drive cups and two screw pins. Stock Replacement OnE-Revo 2.0

This is the Traxxas Titan 380 18-Turn Brushed Motor for use in Traxxas 1/16 scale vehicles like the 1/16 E-Revo, Summit, Slash 4x4, and Mustang.FEATURES 18 turns Used in Traxxas 1/16 scale...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro...

This is the Traxxas XRT Rear (Lower) Bulkhead Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part ForXRTXRT Ultimate

This is the Traxxas X-Maxx Rear (Upper & Lower) Bulkhead Replacing Parts #7727 & #7728 Requires: #5108 Ball Bearings (2) Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part...

This is a set of Traxxas Black 5mm Flanged Steel Serrated Nylon Locking Nuts (8) Set of eight 5 mm black flanged serrated steel nylon locking nuts Accessory Part ForMaxx SlashMaxxUnlimited Desert...

This is the Traxxas X-Maxx 8S Rear Upper and Lower Bulkhead for trucks using the Center Differential (all 8S X-Maxx).This will not fit the 6S version without upgrading to the center diff design...

This is the Traxxas 400 Digital High-Torque Brushless Metal Gear Ball Bearing Waterproof Servo. With 400 oz/in of torque, this is an awesome upgrade for Traxxas 1/10 bashers and off road vehicles...

This is the Traxxas E-Revo 2 Roof Body Skid Plate with 3x12mm Capscrews (4).Stock Replacement OnE-Revo 2.0

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated...

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES:48 pitch83 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur...

This is the Traxxas 2-Amp Wall Charger and 3000mAh 7-Cell 8.4V Flat Pack Battery Completer Set. This set is perfect to go with vehicles like the Slash 2WD, Slash 4x4 VXL, 1/10 Rally, TRX-4, and...

This is a set of Traxxas 30-Degree Blue Caster Blocks for the Traxxas Rustler XL-5, Rustler VXL, Stampede XL-5, Stampede VXL 2WD, Slash XL-5, Slash VXL 2WD, Nitro Slash. Traxxas aluminum caster...

This is the Traxxas 13-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks...

These are the Traxxas 5x11x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings.Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...

This is the optional Assembled Wheelie Bar for all versions of the Traxxas Revo. The accessory Revo wheelie bar is easy to install for controlled wheelies on demand with a unique quick release design...

This is the Traxxas 11-Tooth Rear HD Differential Pinion Gear. This must be used with the #7792 35-tooth diff ring gear.FitsX-MaxxXRT

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter:...

This is the Titan 550 Motor (21-Turn) for the Traxxas E-Maxx and E-Revo Trucks. Features: Fan-cooled 21 turns 14 volt Bullet connectors Includes:One Titan 550 motor Specifications:Length to end...

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage...

This is the X-Maxx 17-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the...

These are the Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires and Foam Inserts (2). Replica BFGoodrich KR3 Tires duplicate the 40" treads used on desert racing trucks for the Unlimited...

This is the Traxxas 11-Tooth Front HD Differential Pinion Gear. This must be used with the #7792 35-tooth diff ring gear. FitsX-MaxxXRT

This is the Traxxas Aluminum Heat Sink for the Traxxas Velineon VXL 380 Brushless Motor in 1/16 scale VXL models. This will fit the brushless 1/16 E-Revo VXL, Summit VXL, Slash VXL, Rally VXL, Ford...

This is the Aluminum Wheelie Bar Axle for the Traxxas Drag Slash. FEATURES:Charcoal Gray in color INCLUDES:(1) Wheelie Bar Axle (3x12 BCS)(2) Threadlock Hardware