Traxxas

This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any...

This is the Traxxas Aluminum Differential Carrier. This diff carrier must be used with 7783X spider gear shafts. Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket, and PTFE...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16...

This is the Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires with SCT Split-Spoke Satin Chrome, Black Beadlock Wheels Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam...

This is the Traxxas 20-Tooth Pinion Gear with 0.8 Mod (compatible with 32-pitch) for 5mm Shaft motors. This can be used on vehicles such as the E-Maxx Brushless and 1/10 Summit.FeaturesHardened...

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush...

This is a pair of Traxxas 20x27x4mm Black Rubber-Sealed Ball Bearings. These are used in the X-Maxx trucks.Features Steel construction with black rubber seals Used as the inner bearing in the...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas 14-Tooth Pinion Gear (48-pitch) with set screw.Fits:1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber...

This is a set of the Traxxas Slash telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Includes: (6) sets of drive shafts (each set consists...

This is the Front Bulkhead for use on the Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURESNylon constructionBlack in color INCLUDES Two front bulkhead halves Four 3x10mm Button Head...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction Anodized blue in color INCLUDESTwo Aluminum Rear Stub Axle CarriersTwo...

These are the Traxxas optional Aluminum Steering Blocks for the Rustler, Stampede and Bandit. FEATURES:Aluminum constructionAnodized red in color INCLUDES:One Left and Right Alloy Steering BlockFour...

This is a set of six Traxxas 4mm x 10mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part for these modelsJatoMaxxNitro SlashX-MaxxXRT

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome...

This is the Traxxas 4-Tec 2.0 Front and Rear Sway Bar Kit with Adjustable Linkage. Improve the handling of your street machine with this sway bar set.Accessory Part For4-Tec 2.0 VXL4-Tec 2.0...

This is the Traxxas TRX-4 Ford Bronco Chrome Side Trim, Retainers, LED Lens and 2.6x8 Screws (24).Stock Replacement OnTRX-4 Ford Bronco

This is the Traxxas 15-Tooth 1.0 Mod Machined Steel Pinion Gear with Set Screw for 5mm Shaft Motors. 15-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw...

This is the Traxxas 22-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

These are the Traxxas 4-Tec 2.0 Rear 1.9 Response Extra Wide Rear Tires. These fit the Traxxas 8372 wheels. These are stock replacement tires for the 4-Tec 2.0 Ford GT and Mustang GT cars. These...

These are the Traxxas TRX-4 Crawler Front and Rear Inner Fenders and Rock Light Covers. This includes two front inner fenders, two rear inner fenders, and 8 rock light covers.FitsTRX-4Includes2...

This is the Traxxas 13-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 13-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears...

These are the Traxxas 6x13x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings,...

This is the Traxxas Spur gear, 50-tooth (1.0 metric pitch)50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can...

This is the Traxxas E-Maxx Brushless Clear Body with Decal Sheet. The body is supplied pre-cut, requiring the paint application.

This is the Traxxas Center Driveshaft 6061-T6 aluminum (blue-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal...

This is a set of Traxxas Center Front and Rear Half Shafts for the 1/16 Slash and E-Revo vehicles. FEATURES: Nylon construction Black in color INCLUDES:One Front Center Half ShaftOne Rear...

This is the Traxxas ProGraphix Body with Decals for the Jato 3.3. Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will never...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro...

This is a set of Traxxas E-Maxx Brushless and 16.8V Steel Center CV-Driveshafts with Inner and Outer Dust Boots. These are genuine Traxxas upgrade parts, so you know they will fit perfectly, and they...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially...

This is a Traxxas Jato 2.5 and 3.3 Chassis Top Plate. This holds the receiver and throttle servos. FEATURES:Nylon construction, holds receiver and throttle servoBlack in color INCLUDES:One Chassis...

This is a pair of 6.4 rate (purple) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small purple square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on...

This is the Traxxas RXT 2.8" Charcoal Gray and Black Chrome Wheels & Gravix Tires (2) Tires & wheels, assembled, glued (2.8") (RXT charcoal gray & black chrome wheels, Gravix tires, foam...

This is the Traxxas Mini Slash 4X4 LED Light Kit The Mini Slash 4X4 LED light kit is built Traxxas Tough, with factory fit and finish for easy installation. The kit includes a front roof light bar...

This is the Traxxas Pro Scale Sand Car LED Rock Light Kit Light up your Pro Scale Sand Car with this LED rock light kit. Lights mount to the shock body with collars for easy installation. Includes:...

This is the Traxxas Pro Scale Sand Car Complete LED Light Kit Funco Sand Car Complete Pro Scale LED light set. Includes: Front Light Bar, Rear Light Bar, Side Lights (Left & Right), and...

This is the Traxxas Ford Raptor R 4X4 Complete (Orange Fox) Body Is it time to replace your Ford Raptor R body or upgrade to an all new look? Ford Raptor R clipless bodies come fully painted with...

This is the Traxxas Ford Raptor R 4X4 Complete (Special Edition Fox) Body Is it time to replace your Ford Raptor R body or upgrade to an all new look? Ford Raptor R clipless bodies come fully painted...