Slayer Pro 4x4

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is a bottle of Traxxas 50K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for peak performance!For use in these vehicles and more!1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmReplacement part...

This is a bottle of Traxxas 30K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10 E-Revo...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBanditDCB...

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a pull-start such as this is a great way to cut some...

This is the Traxxas 1200mah 5-Cell NiMh flat receiver battery pack for use in the Traxxas Jato, Revo, and Slayer Pro trucks.  This 6-volt pack gives the servos power, speed, and will allow longer run-times than smaller packs.  This high...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...

This is a set of 4 Traxxas Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!FeaturesReplaces stock pivot balls and pivot ball cap bushings.Pivot balls are made of steel, pivot...

This is a bottle of Traxxas 100K Weight Diff Oil (.7 oz / 20cc) with fill nozzle. This thick viscosity oil can be used to stiffen up differential action in many RC vehicles. Diff oil this thick is often used for center differentials.For use with these...

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management (TSM) allows you to experience all the extreme power,...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a pair of replacement Traxxas 14mm Steel Wheel Hex Hubs and Pins. These will fit many Traxxas vehicles, including the T-Maxx 2.5, 3.3, E-Maxx, Revo, E-Revo, Summit, and Slayer vehicles. FEATURES Steel construction, black in...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the 500K Weight Differential Oil from Traxxas FEATURES Lubricates differential Clear in color 500K weight INCLUDESOne .70oz (20cc) Bottle Of 500K Diff Lube REQUIRESApplication to differential

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is a Traxxas Revo 40-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is a Traxxas Revo 38-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed connectors and eyelets Includes:One wire harnessOne...

This is the Traxxas Blue Exhaust Pipe Coupler and Exhaust Deflector with Cable Ties for mounting the muffler to the header, and the deflector to the tip of the muffler.Fits: Jato 2.5Jato 3.3Revo 3.3SlayerSlayer Pro

This is a Package of Replacement Caster Spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels. FEATURES:Black nylon construction. INCLUDES:Four caster spacersFour caster shims REQUIRES:Nothing.  These are direct replacement...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is a pair of Traxxas Throttle Dust Boots and a Return Spring for use on the carburetors of the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5 & 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3.3SlayerT-Maxx 2.5 & 3.3

This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3. FEATURES:Direct replacement part INCLUDES:One differential ring gearOne pinion gear REQUIRES:Traxxas Revo 3.32.5x8mm cap head screws (TRA3965)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for Traxxas owners!

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...

This is a Traxxas Revo 36-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...