Home > Cars, Trucks, & Parts > Traxxas >

RPM Blue Rear Suspension A-Arms for Traxxas Slash 2WD
RPM Traxxas Slash 2WD Blue Rear Suspension A-Arms

Our Price: $8.79
You'll earn 9 points

Product Code:

These are the RPM Heavy Duty Blue Rear A-Arms for the Traxxas Electric Slash 2WD Short Course Racing Truck. The RPM rear A-arms for the Traxxas Slash 2WD are designed specifically for the electric version of the Slash. They are molded in RPM's nearly indestructible blend of nylons. These A-arms are backed by the RPM limited lifetime warranty against breakage as well for confidence-inspiring durability and performance.

The first design challenge was to beef up the rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! RPM then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of the A-arms while improving crash durability. Even after all of the increased muscle has been factored in, RPM A-arms still come in at over 10% lighter than the original arms! The final design task was to improve the fit and finish and what they came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available. RPM Slash 2wd rear A-arms use stock suspension geometry and include stock rear toe angles.

RPM Slash 2wd rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.


Two Heavy Duty Blue Rear A-Arms for Traxxas Electric Slash 2WD


Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

Tech Notes: These a-arms are not compatible with the Nitro Slash. Stock rear axle carriers have an upper and lower hinge pin hole. RPM Slash 2wd Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole (which would lower the ride height in the back too much) cannot be used. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.

Accessories for this product...
RPM Blue Front Suspension Arms: Slash 2WD, Rustler, Stampede 2WD
Our Price: $7.69
RPM Blue Front Suspension Arms for Traxxas Slash 2WD, Rustler, Stampede 2WD (RPM80245)