Home > FPV Systems, Cameras, Parts >

DJI 5.8GHz FPV Video Downlink Cloverleaf Antenna Set
DJI 5.8GHz FPV Video Downlink Cloverleaf Antenna Set

Was: $55.00
SALE: $35.00
You'll earn 35 points

Availability: Out of stock
Product Code:

This is the DJI 5.8GHz Video Downlink Cloverleaf Antenna Set. The 5.8GHz Clover-leaf antenna works in the frequency band of 5.8GHz ISM. It can be used in the 5.8GHz wireless video module AVL58 (both TX and RX), and also other transmitters and receivers working in the frequency band of 5.8GHz. The product has the following characteristics: low profile, light weight, high reliability and wide communication range. The cloverleaf antenna design has proven to be one of the best antenna designs for aero - modeling activities, especially the FPV flying.

The product has the characteristic of wide wave band range and circular polarization to ensure the stable transmitting and receiving when the aircraft is in any attitude and position. So it can provide reliable wireless video signals during a flight. The antenna has an advantage of good direction andd has a wider, more well-distributed range of signal than a common antenna, which are important characters during a flight.


Performance Parameters:
Working Frequency: 5.8GHz
Gain (3-Lope): 1.2dBi
VSWR: ≤1.5
RF Bandwidth 150MHz
Horizontal Bandwidth: 360-degree omni
Vertical Bandwidth: 95-degrees
Polarization Mode: Right-handed circular polarization

Physics Parameters:
Working Temperature: -55~125
Height: TX: 70.06mm, RX: 80.06mm
Diameter of Antenna Head: 35.72mm
Weight: TX: 13.43g, RX: 14.27g

Hardware Functions Supported:
Antenna Options: SMA
Maximum Power Supported: 2W
Soft Bend Limit of Coaxial Cable: less than 28 deg (Semi-diameter should be larger than 40mm)