null

Hitec HS-7955TG High-Torque Digital Servo w/Universal Connector

  • Hitec HS-7955TG High-Torque Digital Servo w/Universal Connector
$8999
This item earns 90 Reward Points!
Brand:
Model: HRC37955S

This is a Hitec Digital High-Torque Titanium-Geared Programmable Servo.  This servo comes with a universal connector, allowing it to be used with any current Hitec, JR, Futaba, Airtronics, and most other major radio systems.

Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333 oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.

FEATURES:

  • G2 Digital Circuit
  • Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Titanium Gear Train (MK first gear)

Programmable Features Include:

- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)

*These features are only programmable with the HFP-20 field programmer.

INCLUDES:
Digital servo with 12" wire and universal connector.
2" servo arm
Blue anodized aluminum 1" servo arm
Heavy duty 1-1/2" servo arm
Heavy duty 2-3/4" servo arm
Black disc servo horn
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators
Plastic case and programming instruction sheet
Hitec decals

SPECS:
Speed: 0.19 sec/60 degrees at 4.8V
0.15 sec/60 degrees at 6.0V
Torque: 249.96 oz-in (18 kg-cm) at 4.8V
333.29 oz-in (24.0kg-cm) at 6.0V
Length:  1.57" (40mm)
Width:   0.78" (20mm)
Height:  1.45" (37mm)
Weight: 2.29oz (65g)

COMMENTS:
A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

You May Also Like