|
|
|
|
|
|
|
|
|
|
|
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires.
|
This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws.
|
This is a package of replacement Traxxas 5x8mm Teflon Washers (20) for the Traxxas T-Maxx, Revo, Jato, and other vehicles.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the replacement silicone damper oil that is included in many of the Traxxas kits. It is approximately 30 weight oil (Traxxas does not list exact weight), comes in a 1/2 oz (approximately) bottle and is clear.
|
This is the Traxxas Small Body Clips (12)
|
This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by rollovers.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.
|
These are Traxxas 2x8mm Cap-Head Hex Machine Screws (6). Each package includes six screws.
|
These are the Traxxas 3x27mm Button-Head Hex Machine Screws (6). Each package includes six screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 2.5x8mm Button-Head Hex Machine Screws (6). Each package includes six screws.
|
These are the Traxxas 2.5x16mm Cap-Head Hex Machine Screws (6). Each package includes six screws.
|
This is the Traxxas TRX-4 Crawler Steering Servo Horn.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a set of six Traxxas 2.5mm x 8mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks.
|
This is a package of six 3x6mm Traxxas Button Head Screws.
|
These are Traxxas 3x8mm Button Head Screws (6).
|
|
|
|
|
|
|
|
|
|
|
|
|
These are Traxxas 3x12mm Button Head Screws (6).
|
These are Traxxas 3x30mm Button Head Screws (6).
|
These are the Traxxas Flathead 3x8mm Hex Drive Screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are Traxxas 2.5x8mm Cap Head Screws (6).
|
These are the 3x6mm Flathead Machine Screws from Traxxas.
|
This is set of Traxxas 2.5x10mm Countersunk Machine Screws with Hex Heads (6 pack). These are used in many of the Traxxas 1/16 scale vehicles.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.
|
These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.
|
These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.
|
These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.
|
This is a package of six Traxxas 4x16mm Button-Head Hex Machine Screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas Standard Size Black Body Clips (12). Each pack includes 12 clips.
|
This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System.
|
These are Traxxas Body Clips for the Traxxas T-Maxx, E-Maxx, and Revo Trucks. It is always good to have extra body clips around to keep your body securely fastened. These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 5x8x2.5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
This is the Traxxas TRX-4 Crawler Jack and Screw Pin.
|
This is the Traxxas TRX-4 Crawler 39-Tooth 0.8 Mod Spur Gear.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Traxxas TRX-4 Crawler 45-Tooth 0.8 Mod Spur Gear.
|
These are the Traxxas TRX-4 Crawler Grey Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.
|
These are the Traxxas TRX-4 Crawler Red Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Traxxas TRX-4 Scale Crawler Motor Plate and Upper Spur Gear Cover.
|
This is the Traxxas TRX-4 Black Jack (1) w/2x8 Screw (1)
|
These are the Traxxas Black Heavy Duty Body Clips. These can be used on a wide variety of Traxxas cars and trucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor.
|
This is a set of Traxxas 4mm Flanged Nylon Locking Nuts.
|
This is a Traxxas Jato 2.5 and 3.3 Shim Set. This includes four silver metal hollow balls and four 3mm silver washers. These are for adjusting the roll center of the truck.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Traxxas 1/10 Summit Locking Diff Servo Horn with Built-In Spring and Hardware
|
This is the Traxxas Gear, 9-T pinion (32-p) (mach. steel)/ set screw
|
This is the Traxxas Gear, 11-T pinion (32-p) (mach. steel)/ set screw
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 5x10x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
These are the Traxxas 5x11x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
This is a set of two Traxxas TRX-4 Crawler Red Fuel Canisters and a mounting Screw Pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Traxxas 10-Tooth 32-Pitch Steel Pinion Gear with Set Screw.
|
These are the Traxxas TRX-4 Yellow Fuel Canisters (2) with 3x8 Screw (1). Dress up your scale rig with these fuel cans!
|
These are the Traxxas TRX-4 Blue Fuel Canisters (2) with 3x8 Screw (1). Dress up your scale rig with these fuel cans!
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas TRX-4 Black Fuel Canisters (2) with 3x8 Screw (1). Dress up your scale rig with these fuel cans!
|
These are the Traxxas TRX-4 White Fuel Canisters (2) with 3x8 Screw (1). Dress up your scale rig with these fuel cans!
|
This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 6x13x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used on vehicles such as the TRX-4 and X-Maxx 8S trucks.
|
These are the Traxxas 7x14x5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
These are the Traxxas 4x10x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
|
|
|
|
|
|
|
|
|
|
|
|
These are the Traxxas 6x12x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers.
|
These are the Traxxas TRX-4 Tail Light Housings, Lenses, and Decals (left & right).
|
This is the Traxxas TRX-4 Scale Crawler Receiver Box Seal Kit with O-Ring, Seals, and Silicone Grease.
|
|