Telluride

This is the Traxxas AC to DC 40-watt wall power adapter designed specifically for use with the Traxxas peak detecting DC fast chargers. The new AC to DC Adapter from Traxxas lets you plug your charger into a standard AC wall outlet at home or the track...

This Completer Kit Includes:Traxxas EZ-Peak Plus 4-Amp iD Battery Charger (TRA2970)Traxxas 5800mAh 7.4V 2S LiPo Battery with iD Connector (TRA2843X)This is the perfect combo package for nearly all Traxxas 1/10 XL-5 and VXL cars and trucks! Traxxas...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is the Traxxas Power Cell 7.4V 5800mAh 25C 2S iD LiPo Battery with iD Connector. Traxxas 5800mAh Power Cell LiPo packs are ideal for all XL-5 and VXL Rustler, Stampede, Stampede 4x4, Bandit, Funny Car, and Monster Jam models, as well as the Spartan...

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas 7-Cell 8.4V 3000mAh NiMH Hump Pack Battery with the Traxxas iD connector. This pack is a stock replacement battery for many Traxxas 1/10 scale vehicles. It will fit all of the Traxxas vehicles listed below:Compatible with:Rustler...

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver in ColorBent for Easy RemovalIncludesTen Bent Silver...

This is the Traxxas Titan 550 12 Turn Electric Motor for vehicles like the Slash, Stampede, Rustler, and Bandit.  The Titan 12T 550 modified motor is designed for incredible mod-motor power output with virtually maintenance-free operation, and...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible...

This is the Traxxas 5000mAh 8.4V 7-Cell NiMH Hump Battery Pack with the iD Connector. This battery is perfect for vehicles like the Bandit, Rustler, Stampede, Stampede 4x4, Monster Jam trucks, Telluride, and other vehicles. Experience the longest run...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLJatoNitro RustlerNitro SlashRustler 4X4 VXLRustler...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips).  The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on numerous vehicles for the body and other places...

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter: 7mm Replacement Part...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES:Constructed of...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck.   For the ultimate in bump and jump control, Traxxas Big Bore shocks...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD, 4x4, Rustler, and Bandit vehicles.Fits1/10 E-Revo...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the Traxxas Alumimum Bearing Adapter for the Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. FEATURES 6061-T6 anodized blue aluminum constructionSteel 10x15x4mm ball bearing with blue rubble sealUsed on slipper shaft INCLUDESOne aluminum...

This is the Traxxas Heavy Duty Slipper Clutch Rebuild Kit. This is used on vehicles with the Revo-style slipper setup, including the Revo 3.3, E-Revo, E-Revo Brushless, T-Maxx 3.3, E-Maxx, E-Maxx Brushless, Summit, and Slayer Pro. Features:...