Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
GPM-RUS019-G
GPM Green Aluminum Caster Blocks fits 2WD Stampede Rustler Slash
These are the GPM Racing Green Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...$1399 -
GPM-SLA2W030-R
GPM Red Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
GPM-SLA057-R
GPM Red Rear Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
These are the GPM Racing Red Aluminum & Steel Rear Turnbuckle Camber Link for Traxxas brushless 1/10 Slash 2WD 4x4, Rustler 2WD & 4x4, Stampede 2WD & 4x4 and Nitro Slash vehicles. These feature aluminum rod ends with a durable steel turnbuckle for...$1990 -
RRP8713
Robinson Steel 13T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
RRP8711
Robinson Steel 11T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA3614
Traxxas Front & Rear Body Mount Set: Stampede Trucks
These are the replacement body mounts for the Traxxas Stampede truck. They are constructed of black plastic and are the posts that the lexan truck body attaches to. Includes:One front body mountOne rear body mount$5 -
TRA2592
Traxxas Buttonhead Screws 3x40mm (6)
These are the Traxxas Button Head 3x40mm Screws (6). Features: Metal construction Black in color Includes: Six 3x40mm buttonhead hex machine screws$3 -
RCZTRA119
RC Screwz Traxxas Bigfoot (36034-8) Stainless Steel Screw Kit
This is the RC Screwz Traxxas Bigfoot (36034-8) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2699 -
TRA6762X
Traxxas Stampede 4X4 Brushless ProGraphix Body W/Decals
This is the Traxxas Stampede 4X4 Brushless ProGraphix Body (graphics are printed, requires paint & final color application)/ decal sheet From mild to wild, choose your own colors to personalize your clipless Stampede 4X4 body. The detailed graphics...$3995 -
JCO0405
JConcepts 1989 Ford F-150 California Body (Clear): Stampede
This is the JConcepts 1989 Ford F-150 California Body (Clear) for the Traxxas Stampede 2WD and BigFoot Features Officially licensed by Ford to JConcepts Pre-runner inspired body, cab and window design 1:1 headlight and grill treatment Clear heavy-duty...$2549 -
JCO0298BFR
JConcepts 1985-1993 Ford Bigfoot Ranger Body (Clear): Stampede 2WD, Stampede 4x4
This is the JConcepts 1985-1993 Ford Bigfoot Ranger Body (Clear) for the Traxxas Stampede 2WD and Stampede 4x4 Features Officially Licensed By Ford To JConcepts BIGFOOT 4X4 Decal Officially Licensed To JConcepts Direct Fit For Traxxas Stampede And...$44 -
GPM-RUS022-BK
GPM Black Aluminum Rear Stub Axle Carriers for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These are...$1590 -
GPM-CRA030-BK
GPM Black Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
GPM-CRA028-R
GPM Red Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
TRA3689
Traxxas 2.8 Paddle Tires on Black Chrome Wheels for 2WD Stampede Rear
This is a pair of Traxxas Paddle Tires Pre-Mounted on Black Chrome 2.8" Wheels for the rear of Stampede 2WD trucks. Add these to your truck for better grip in sand, snow, and mud!FitsBigfoot & Monster Jam trucks (rear)Stampede XL-5 2WD (rear)Stampede VXL...$3995 -
HRASTE90MR128
Hot Racing Front Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring Steel ConstructionMulti-Rate Springs, Dual-Rate (DRS) allow...$988 -
TRA6757
Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware). Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...$18 -
RPM82053
RPM Chrome Rear Revolver 2.2" Wheels for Electric Rustler, Stampede
This is a pair of RPM Chrome Rear Revolver 2.2" Wheels for the Traxxas Electric Rustler and Electric Stampede.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! The Revolvers for 1/10th scale trucks are...$749 -
TRA2668
Traxxas Spring Retainers & Spacers for Big Bore Shocks
These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...$550 -
TRA6537
Traxxas Wire Retainer/Gear Cover w/Screws
This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...$3 -
TRA2582
Traxxas Buttonhead Screws 3x30mm (6)
These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)$250 -
RRP8722
Robinson Extra Hard 5mm Bore 22T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA3639
Traxxas Front Shock Tower: Stampede, Rustler, Bandit, Slash
This is a stock replacement FRONT shock tower. SPECS:Height: 2 3/4"Thickness: 1/4"Width at base: 2 3/4"Width at top: 2" INCLUDES:(1) Front shock tower Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag SlashFord F-150...$4 -
GPM-SLA2W028-OR
GPM Orange Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
RCZTRA021
RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit
This is the RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2399 -
GPM-SLA055-BK
GPM Black Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Black Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-RUS003F-BK
GPM Black Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
TRA3432
Traxxas Curved Tip Body Scissors
This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...$895 -
TRA3431
Traxxas Straight Tip Body Scissors
This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...$895 -
RPM73754
RPM Green Front Bulkhead for Traxxas 2WD
This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
TRA5185
Traxxas Replacement Rubber Wheelie Bar Tires
This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...$7 -
TRA2591
Traxxas 3x23mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4...$250 -
RRP8718
Robinson Extra Hard 5mm Bore 18T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 18-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$899 -
TRA3767
Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
TRA1834
Traxxas Standard Size Body Clips (12)
This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...$2 -
TRA1815
Traxxas Body Washers
This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers$2 -
TRA3934
Traxxas Body Clips (12)
These are Traxxas Body Clips for the Traxxas Vehicles. It is always good to have extra body clips around to keep your body securely fastened. These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...$3 -
GPM-RUS030-BK
GPM Black Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included...$1699 -
GPM-CRA332F-BK
GPM Black Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-RUS003F-OR
GPM Orange Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999