Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA3636T
Traxxas Steering Blocks, 6061-T6 aluminum (Orange-Anodized)
These are the Traxxas Steering Blocks, 6061-T6 aluminum (Orange-Anodized) (2)Traxxas aluminum steering blocks improve the appearance, ruggedness, and control of your Traxxas model. The machined billet 6061-T6 aluminum construction adds strength and...$2995 -
TRA3632T
Traxxas Caster Blocks (30-degree) Orange-Anodized 6061-T6 Aluminum
These are the Traxxas Caster Blocks, 30-degree, Orange-Anodized 6061-T6 Aluminum (2)Orange aluminum 30° caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds strength and...$1995 -
TRA1747T
Traxxas Aluminum (4mm) Flanged and Serrated Nuts (Orange-Anodized) (4)
These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4)Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...$750 -
TRA9490X
Traxxas Plate, Motor, Blue (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Blue (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$12 -
TRA9490R
Traxxas Plate, Motor, Red (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Red (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$12 -
TRA9490G
Traxxas Plate, Motor, Green (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Green (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$12 -
TRA9490P
Traxxas Plate, Motor, Pink (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Pink (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$12 -
TRA9490A
Traxxas Plate, Motor, Orange (4mm Aluminum ) w/ Hardware
This is the Traxxas Plate, Motor, Orange (4mm Aluminum ) w/ Hardware (2) 3x10mm CS with split and flat washer Made specifically for the Pro Series Magnum 272R transmission, these 4 mm aluminum motor plates are thicker than the stock plate for increased...$12 -
TRA9490
Traxxas Plate, Motor, Blue (3.2mm) (Aluminum)
This is the Traxxas Plate, Motor, Blue (3.2mm) (Aluminum)Replacement Part For These Models:Bandit VXLDrag SlashRustler VXLSlash VXLStampede VXL$10 -
GPM-RUS055-GS
GPM Gunmetal Aluminum Front Suspension Arms for 2WD Stampede Rustler Slash
These are the GPM Racing Gunmetal Aluminum Front Suspension Arms for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Nitro Slash trucks. Made of 6061-T6 aluminum and finished with anodizing, these look awesome and help beef up your truck...$2390 -
GPM-CRA055-R
GPM Red Aluminum Front Suspension Arms for 2WD Slash Rustler Stampede
These are the GPM Racing Red Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...$1999 -
GPM-SLA2W055-GS
GPM Gunmetal Aluminum Front Suspension Arms fits 2WD Stampede Rustler Slash
These are the GPM Racing Gunmetal Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins...$2690 -
RCZTRA057
RC Screwz Traxxas Skully Monster Truck Stainless Steel Screw Kit
This is the RC Screwz Traxxas Skully Monster Truck Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2599 -
TRA2765T
Traxxas X-Long Ti-Ni Hardened Steel Shock Shafts (2)
These are the Traxxas X-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...$10 -
GPM-CRA055-OR
GPM Orange Aluminum Front Suspension Arms for 2WD Stampede Rustler Slash
These are the GPM Racing Orange Aluminum Front Suspension Arms for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.These are a direct fit upgrade for stock Traxxas part 3631 suspension arms.Accessory Part ForTraxxas 1/10...$1999 -
GPM-CRA028-BK
GPM Black Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
GPM-CRA021-B
GPM Blue Aluminum Steering Blocks for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Blue Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10 Monster...$1399 -
HRACSG1828
Hot Racing 28-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...$588 -
TRA5854
Traxxas Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)
This is the Traxxas Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469). This is Traxxas part number 5854Part Number: 5854 / TRA5854Fits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD...$8 -
TRA3767T
Traxxas Orange Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA2546
Traxxas 4x15mm Countersunk Head Head Machine Screws (6)
This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...$250 -
TRA5576A
Traxxas All-Star 2.8" Black Chrome Wheels (Elec 2WD Fr, 4x4 Fr/R, Nitro Rr)
This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...$895 -
RRP8719
Robinson Extra Hard 5mm Bore 19T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA2514
Traxxas Racing Sponsors Decal Sheet
This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...$3 -
TRA6525
Traxxas Communication link, telemetry expander
This is the Traxxas Communication link, telemetry expander The communication link connects your Traxxas 6533 TSM receiver to the optional Telemetry Expander Module 2.0. Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLChevrolet...$4 -
TRA2748R
Traxxas Basic Tool set
This is the Traxxas Basic Tool set Basic tool set includes 1.5 mm, 2.0 mm, and 2.5 mm hex wrenches, 4-way wrench, 8 mm & 4 mm combo wrench, and U-joint wrench. Includes 1.5mm Hex Wrench2.0mm Hex Wrench2.5mm Hex Wrench4-Way Wrench8mm & 4mm...$6 -
TRA8721
Traxxas Speed Bit Handle Medium (One Piece)
This is the Traxxas Speed Bit Handle Medium (One Piece) The medium speed bit handle holds bits securely with excellent hand comfort and more wrenching torque.$6 -
TRA5038
Traxxas Shock Oil Spinning Carousel Rack
This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.$1495 -
TRA9917
Traxxas Medium RC Car/Truck Duffle Bag
This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...$11995 -
RPM70592
RPM Body Skid Rails
This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...$899 -
TRA9494
Traxxas Heavy Duty Input Gear/Shaft 22T Transmission
This is the Traxxas Heavy Duty Input Gear/Shaft 22T Transmission The heavy-duty input shaft features a steel 22-tooth input gear that's press-fit onto a broad flat for maximum durability and power transfer. Use as a direct replacement for Magnum 272R...$10 -
TRA3697
Traxxas LED Light Set Complete w/Front & Rear Bumpers with LED lights: Bigfoot 2WD
This is the Traxxas LED Light Set Complete with Front & Rear Bumpers with LED Lights & BEC Y-harness for the 2WD Bigfoot. Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the...$3995 -
TRA3694
Traxxas LED Light Kit Complete w/ Front & Rear Bumpers: Stampede 2WD
This is the Complete LED Light Set for the Traxxas Stampede. Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Stampede, the kit includes 4 brilliant white forward-facing LEDs and two...$3995 -
TRA3690
Traxxas Front Assembled LED Light Bar: Slash and Stampede
This is the Traxxas Assembled Front LED Light Bar for the Slash and Stampede models. 2WD Slash - Requires front bumper #5835X2WD Stampede - Requires front bumper #36352WD Bigfoot - Requires front bumper #36304WD Slash - Requires front bumper #6835X4WD...$22 -
GPM-RUS022-B
GPM Blue Aluminum Rear Stub Axle Carriers for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Blue Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These are...$1590 -
GPM-RUS021-R
GPM Red Aluminum Steering Blocks fits 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Red Aluminum Steering Blocks for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, Bandit, and Nitro Slash vehicles. Made from 6061-T6 aluminum and anodized with a color finish, these are durable and look great.These are...$1590 -
GPM-CRA019-OR
GPM Orange Aluminum Caster Blocks for 2WD Stampede Rustler Slash
These are the GPM Racing Orange Aluminum Caster Blocks for the Traxxas Stampede 2WD, Rustler 2WD, Slash 2WD, and Nitro Slash trucks.This fits in place of the Traxxas 3632 caster block set.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1399 -
HRASTE872
Hot Racing Hardened Steel 72T 48P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit
This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL brushless trucks. A larger pinion gear will be required on...$1988 -
HRASLF63RS286
Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Slash, Stampede, Rustler
These are the Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles...$888 -
RPM82062
RPM Black Revolver 2.2" Wheels for Electric Rustler/Stampede Front, Nitro Rear
This is a pair of RPM Black Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the front...$599