Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
GPM-CRA021-OR
GPM Orange Aluminum Steering Blocks for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Orange Aluminum Steering Blocks for the Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Slash trucks.This is a direct replacement for Traxxas part 3736 steering blocks.Accessory Part ForTraxxas 1/10...$1399 -
HRANSG820
Hot Racing 20-Tooth 48P Nitride Steel Pinion Gear 5mm & 1/8 Shafts
This is the Hot Racing 20-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like the Traxxas Slash 2WD, Stampede 2WD, Rustler, as well as...$888 -
TRA3937
Traxxas 4x12mm Button-Head Hex Machine Screws (6)
This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...$250 -
TRA3623A
Traxxas Green Front & Rear Skid Plates for Stampede/Skully
These are the Traxxas Green Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD$7 -
TRA2577
Traxxas 3x10mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
TRA3932
Traxxas Screws, Flat Head (6)
These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm$250 -
TRA2552
Traxxas Hex Drive Screws, 3x12mm (6): Revo, Slayer
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...$250 -
TRA2426
Traxxas 48P Pinion Gear w/Set Screw: 26T
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...$3 -
TRA1918
Traxxas 48P Pinion Gear 18T
This gear is a brass pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Brass, 48 pitch, 18 tooth pinion gear.Shaft length- 3/16" Gear length- 1/4" Overall length- 7/16"Shaft diameter- 1/4" Gear...$3 -
TRA5347
Traxxas Large Rod Ends w/Hollow Balls (12): Revo
This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks. There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...$9 -
GPM-CRA022-B
GPM Blue Aluminum Rear Stub Axle Carriers for 2WD Slash Rustler Stampede Bandit
These are the GPM Racing Blue Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
GPM-CRA038GC-R
GPM Red Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles. This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999 -
GPM-CRA028-B
GPM Blue Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
TRA2735P
Traxxas Pink Front Bumper for Stampede 2WD, Rustler, Bandit
This is the Traxxas Pink Front Bumper for Stampede 2WD, Rustler, Bandit, and several other vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5SkullyStampede VXL...$3 -
RPM73759
RPM Red Front Bulkhead for Traxxas 2WD
This is the RPM Red Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
RRP8712
Robinson Steel 12T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 12-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA2580
Traxxas 3x20mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...$250 -
RPM82052
RPM Black Rear Revolver 2.2" Wheels for Electric Rustler, Stampede
This is a pair of RPM Black Rear Revolver 2.2" Wheels for the Traxxas Electric Rustler and Electric Stampede.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! The Revolvers for 1/10th scale trucks are...$599 -
TRA3632X
Traxxas Red Aluminum 30-Degree Caster Block Set: Rustler, Stampede, Slash
This is a set of optional 30 Degree Red Caster Blocks for the Traxxas Rustler, Stampede, and Slash 2WD FEATURES Anodized aluminum construction Red in color 30 degree INCLUDESOne left and right 30 degree red anodized aluminum caster...$1995 -
TRA5353
Traxxas Blue Anodized Wheel Nuts,17mm (4): Revo, T-Maxx 3.3, E-Maxx Brushless
This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...$10 -
TRA3652X
Traxxas Red Aluminum Rear Stub Axle Carriers: Slash 2WD Rustler, Stampede 2WD, Bandit
These are the Traxxas Red Aluminum Rear Stub Axle Carriers with Bearings for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. These fit XL-5 and VXL versions of those vehicles.Traxxas aluminum stub axle carriers add both strength and...$2995 -
TRA5525
Traxxas Rod Ends/Hollow Balls (12ea): Jato 3.3, Slash
This is a set of Traxxas Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls. Replacement Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord F-150 Raptor R 4X4Hoss 4X4...$9 -
RPM80189
RPM Red Rear A-Arms for Rustler & Stampede 2WD
These are the RPM Red Rear Suspension A-Arms for Traxxas electric Rustler and Stampede 2WD vehicles. These work on XL-5 brushed and VXL brushless versions. The arms work with all variations of the electric Stampede 2WD, including Skully, Craniac, and...$799 -
RPM73275
RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
This is the RPM Castle Sidewinder 3 and Sidewinder SCT Blue ESC Cage for use with Traxxas vehicles like the Slash 2WD, Slash 4x4, Stampede 4x4, 1/10 Rally VXL and others (see Tech Notes for vehicle fit info).The RPM cage allows the ESC to be run with or...$749 -
TRA4761
Traxxas Aluminum X-Long Rear Shocks (Hard-Anodized & PTFE-coated) w/o Springs (2)
This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below.Fits:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit...$2295 -
TRA3772A
Traxxas Rear Black Chrome All-Star 2.8" Wheels
This is a pair of Traxxas 2.8" Black Chrome All-Star Wheels for the Rear of the electric Rustler and Stampede 2WD trucks. These have a 12mm hex hub.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Hex: 12mmFits1/10 Monster Jam...$895 -
TRA3767G
Traxxas Green Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA3636G
Traxxas Green Aluminum Steering Blocks - Slash Rustler Stampede Bandit
This is a pair of Traxxas Green 6061-T6 Aluminum Steering Blocks with Bearings for the Slash 2WD, Stampede 2WD, Rustler, Bandit, Nitro Slash vehicles.Features6061-T6 Aluminum ConstructionGreen anodized colorIncludes:Left and Right Steering BlocksFour...$2995 -
TRA2074
Traxxas Servo Case & Gaskets for 2056 & 2075 Servos
This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet Corvette StingrayDrag SlashE-Revo VXL BrushlessFactory Five...$6 -
TRA1870
Traxxas Terra Spiked Tires for 2.2" Wheels
This is a pair of Traxxas Terra-Spiked Tires for 2.2" wheels. These were stock on the Sledgehammer, but can be used on other vehicles with standard 2.2" truck wheels.FeaturesHard-traction rubber-type materialAlso features a tractor type tread with...$1595 -
GPM-RUS019-G
GPM Green Aluminum Caster Blocks fits 2WD Stampede Rustler Slash
These are the GPM Racing Green Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...$1399 -
GPM-SLA2W030-R
GPM Red Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
GPM-SLA057-R
GPM Red Rear Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
These are the GPM Racing Red Aluminum & Steel Rear Turnbuckle Camber Link for Traxxas brushless 1/10 Slash 2WD 4x4, Rustler 2WD & 4x4, Stampede 2WD & 4x4 and Nitro Slash vehicles. These feature aluminum rod ends with a durable steel turnbuckle for...$1990 -
RRP8713
Robinson Steel 13T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
RRP8711
Robinson Steel 11T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849