Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA1747
Traxxas 4mm Stainless Steel Lock Nuts
These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm$2 -
TRA3937
Traxxas 4x12mm Button-Head Hex Machine Screws (6)
This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...$250 -
TRA6850X
Traxxas Internal & External Splined Half Shafts & U-Joints
This is the Traxxas Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4). This is Traxxas part number 6850XPart Number: 6850X / TRA6850XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler...$8 -
HRATD105X06
Hot Racing Aluminum 105mm HD Big Bore Rear Shocks for Slash, Stampede, Rustler
These are the Hot Racing Aluminum 105mm HD Big Bore Shocks. These can be used on the rear of Traxxas Slash 2WD & 4x4, Stampede 2WD & 4x4, Rustler, and many other vehicles using 105mm shocks. These can be great for scale and rock crawler builds as well...$2888 -
TRA2426
Traxxas 48P Pinion Gear w/Set Screw: 26T
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 26 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...$3 -
TRA3669A
Traxxas Front All-Star Black Chrome Wheels w/Talon Tires: Stampede VXL
This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued to tough 2.8″ All-Star...$2695 -
TRA2742X
Traxxas Rod Ends & Hollow Balls (6)
This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...$4 -
TRA1951R
Traxxas Steel CV-Driveshafts for Rustler & Stampede 2WD
This is pair of Traxxas Splined Steel Constant-Velocity Driveshafts for use on electric Rustler and Stampede 2WD trucks. This will fit the XL-5 and VXL versions.FeaturesSteel constructionConstant velocity designFully assembledFitsCraniacRustler...$6995 -
HRATE883H
Hot Racing 83T 48P Aluminum Spur Gear for Traxxas 2WD Slash, Stampede, Rustler, Bandit
This is the Hot Racing 83-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$1988 -
RPM80529
RPM Red Gear Cover for 1/10 Traxxas 2WD Slash Stampede Rustler Bandit
This is the RPM Red Transmission Gear Cover for 1/10 Traxxas Slash 2WD XL-5 & VXL, Stampede 2WD XL-5 & VXL, Rustler XL-5 & VXL, and Bandit XL-5 & VXL buggies. This replaces Traxxas gear cover #3792. These covers are not recommended for use with spur...$499 -
TRA3652A
Traxxas Blue Aluminum Rear Stub Axle Carriers: Slash 2WD, Rustler, Stampede 2WD, Bandit
These are the Traxxas Blue Aluminum Rear Stub Axle Carriers with Bearings for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. These fit XL-5 and VXL versions of those vehicles.Traxxas aluminum stub axle carriers add both strength and...$2995 -
TRA3623X
Traxxas Blue Front & Rear Skid Plates for Stampede/Skully
These are the Traxxas Blue Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD$7 -
TRA3139X
Traxxas Red Aluminum 59mm Turnbuckle Toe Links: Rustler, Slash 2WD, 4x4
These are the optional Traxxas Red Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Slash 4x4, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These...$12 -
TRA6773X
Traxxas Rustler 4x4 Talon Extreme Tires on Black Chrome Wheels (4x4 F/R, 2WD Fr)
These are the Traxxas Rustler 4x4 Talon Extreme Tires on Black Chrome Wheels with 12mm Hex for 4x4 Front/Rear and electric 2WD Front. In addition to the Rustler 4x4, these can be used with Stampede 4x4, Slash 4x4 (with body modification), and...$2695 -
MIP18140
MIP X-Duty Rear CVD Drive Kit for Slash/Stampede 4x4, Stampede/Rustler VXL
This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...$5499 -
TRA2938X
Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers
This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...$12 -
GPM-CRA028-B
GPM Blue Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
TRA3792
Traxxas Transmission Gear Dust Cover w/Screws (Telemetry-Ready)
This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors.IncludesTransmission Gear Dust Cover3x6 mm round head screws (to mount...$350 -
TRA6526
Traxxas Auto-Detectable Temperature Sensor
This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into the optional TQi Telemetry Expander to provide...$14 -
TRA6774
Traxxas Electric 2WD Rear Talon EXT Tires Mounted on Black 2.8 Wheels (2)
These are the Traxxas electric Rustler & Stampede 2WD Rear Talon Extreme Tires Mounted on Black 2.8" Wheels with 12mm Hexes. These are set up for use on the REAR only. The tires come pre-glued to the wheels with foam inserts installed. Accessory Part...$2595 -
TRA3614
Traxxas Front & Rear Body Mount Set: Stampede Trucks
These are the replacement body mounts for the Traxxas Stampede truck. They are constructed of black plastic and are the posts that the lexan truck body attaches to. Includes:One front body mountOne rear body mount$5 -
TRA3638
Traxxas Rear Shock Tower: Stampede, Rustler, Bandit, Slash
This is the stock replacement REAR shock tower for the Traxxas Stampede. FEATURES:Made from black molded nylon For the Traxxas Stampede SPECS:Width at top: 4 5/16"Width at bottom: 2 1/4"Thickness: 1/4"Height: 2 13/16" INCLUDES:(1) Rear shock tower for...$450 -
WGT411
WingTote Deluxe Truck Tote (Blue)
This is the Wing Tote 1/8 Scale Monster Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks. FeaturesMade with 600 Denier...$8299 -
TRA3725X
Traxxas Battery Expansion Kit: Rustler, Stampede 2WD
This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise the electronic speed control mount and battery posts...$6 -
TRA3355R
Traxxas VXL-3S Velineon Waterproof ESC
This is the Traxxas Velineon VXL-3S Velineon Waterproof ESC. This is the replacement for the ESC found in many of the 1/10 brushless trucks, designed for use with the Velineon 3500 motor. See full list of compatible trucks below.The Velineon VXL-3s...$9995 -
TRA3018R
Traxxas XL-5 ESC Waterproof Electronic Speed Control w/LVD
This is the Traxxas XL-5 Waterproof Electronic Speed Control (ESC). This comes pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power...$5995 -
HRATE890H
Hot Racing 90T 48P Aluminum Spur Gear for Traxxas Stampede 2WD
This is the Hot Racing 90-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...$1988 -
TRA6527
Traxxas Auto-Detectable Voltage Sensor
This is the Traxxas Auto-Detectable Smart Voltage Sensor. The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...$14 -
TRA3655T
Traxxas HD Orange Front/Rear Suspension Arms (2) for 4x4 Slash Rustler Stampede
These are the Traxxas Heavy Duty Orange Front or Rear Suspension A-Arms (2) for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and XO-1 cars. These can be used as a rear arm upgrade for Stampede 2WD and Rustler 2WD trucks as well. This is a direct...$12 -
TRA5347
Traxxas Large Rod Ends w/Hollow Balls (12): Revo
This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks. There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...$9 -
TRA6540
Traxxas Telemetry Trigger Magnet
This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnetFor use with:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...$2 -
GPM-CRA030-B
GPM Blue Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
RPM70832
RPM Black Rear Bumper for Traxxas Stampede 2WD
This is the RPM Black Rear Bumper for the Traxxas Stampede 2WD electric trucks. This fits XL-5 and VXL versions, as well as the Bigfoot and Skully versions. Bigfoot #1 may require removal of stock bumper on body.Finally, a rear bumper for the Traxxas...$949 -
TRA3632G
Traxxas Green Aluminum 30-Degree Castor Blocks for 2WD Stampede, Slash, Rustler, Nitro Slash
This is a pair of Traxxas Green 6061-T6 Aluminum 30-Degree Castor Blocks with vertical suspension screw pins. These high-quality aluminum castor blocks are strong, precise, and look great! These fit Slash 2WD, Stampede 2WD, Skully, Craniac, Rustler,...$1995 -
TRA6757
Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware). Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...$18 -
TRA3623
Traxxas Stampede 2WD Skid Plates
This is a replacement set of skid plates for the Traxxas Stampede. Black front and rear skid plates for Traxxas 2WD Stampede models. FEATURES Made of black molded nylon For the Traxxas Stampede SPECSLength of front plate: 5 5/8"Thickness of front...$7 -
TRA4728
Traxxas 28T Pinion Gear (48 Pitch): Slash 2WD
This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48$3 -
TRA3669
Traxxas Chrome Wheel w/Talon Tires Nitro Stampede/Rustler (Rear) or Electric Stampede/Rustler (Front)
These are a set of Traxxas 2.8" Talon Tires Mounted on All Star Wheels. These will fit the front of the electric Stampede 2WD and Rustler, Front & Rear of the Stampede 4x4, or the rear of the Nitro Stampede and Nitro Rustler trucks. Talon tires...$2595 -
TRA6774X
Traxxas 2.8 Talon Extreme Tires on Black Chrome Wheels for 2WD Electric Rear
These are the Traxxas electric Rustler & Stampede 2WD Rear Talon Extreme Tires Mounted on Black Chrome 2.8" Wheels with 12mm Hexes. These are set up for use on the REAR only. The tires come pre-glued to the wheels with foam inserts installed...$2695 -
TRA6522
Traxxas RPM Sensor
This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...$12