Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA2981
Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo Charger
This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...$8995 -
TRA2640
Traxxas Chrome Suspension pins, 44M (2) w/E-Clips
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...$250 -
TRA3767G
Traxxas Green Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA1747A
Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4)
This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4). These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...$750 -
RPM73752
RPM Black Front Bulkhead for Traxxas 2WD
This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
TRA3641A
Traxxas Front & Rear Camber Link Set: Rustler, Stampede
These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long links Specifications:ShortLength: 77 mm (3.03")Width: 9 mm...$3 -
TRA3644
Traxxas Front Camber Link Turnbuckle, 39mm (2): Stampede & Rustler VXL
These are the 39mm Turnbuckle Camber Links for the Traxxas Stampede and Rustler VXL. FEATURES Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDESTwo front 39mm (69mm center to center) turnbuckles and...$7 -
TRA8712
Traxxas Speed Bit Essentials 7-Pc Hex & Nut Driver Set 1/4" Drive with Handle & Pouch
This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...$6995 -
TRA3762A
Traxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more. Traxxas oil-filled Ultra Shocks utilize X-rings for a...$18 -
TRA3632A
Traxxas Blue Aluminum 30-Degree Caster Block Set: Rustler, Stampede, Slash
This is a set of Traxxas 30-Degree Blue Caster Blocks for the Traxxas Rustler XL-5, Rustler VXL, Stampede XL-5, Stampede VXL 2WD, Slash XL-5, Slash VXL 2WD, Nitro Slash. Traxxas aluminum caster blocks improve the appearance, ruggedness, and control...$1995 -
TRA2416
Traxxas 48P Pinion Gear w/Set Screw: 16T
This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES:Steel construction INCLUDES:16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES:Installing on motor shaft SPECS:Number of Teeth: 16TPitch: 48Inner Diameter: 0.12" (3mm)$350 -
TRA2423
Traxxas 48P Pinion Gear w/Set Screw: 23T
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES:Pinion gear with set screw, Silver in color INCLUDES:(1) 23 Tooth 48 Pitch Pinion Gear(1) One 4mmx2mm set screw REQUIRES:Installation SPECS:Outer Diameter: 14mm (9/16")Inner Diameter: 11mm...$3 -
TRA1951
Traxxas Long Truck Half-Shafts: Rustler, Stampede, Slash
This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints$6 -
TRA4725
Traxxas 25T Pinion Gear (48 Pitch) w/Set Screw
This gear is a steel pinion gear in 48 pitch Features:Brass pinion gear Includes:1 gear and 1 set screw Specs:Steel, 48 pitch, 25 tooth pinion gear.Shaft length- 3/16" Gear length- 1/4" Overall length- 7/16"Shaft diameter- 1/4" Gear...$3 -
TRA2746
Traxxas 3x6mm Metal Washers (12)
These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLNitro SlashRustler 4X4 VXLRustler 4X4Slash 2WD...$150 -
TRA2532
Traxxas Fiberglass Tie Bar: Nitro Rustler, Stampede, Bandit
This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...$4 -
TRA3636A
Traxxas Aluminum Front Steering Blocks (Blue): Stampede, Rustler, Slash, Bandit
These are the optional Traxxas Aluminum Steering Blocks for the Rustler, Stampede and Bandit. FEATURES:Aluminum constructionAnodized blue in color INCLUDES:One Left and Right Alloy Steering BlockFour 5x11mm Metal Bearings REQUIRES:Installation into...$2995 -
TRA3352R
Traxxas VXL Velineon 3500 Brushless Motor Rebuild Kit
This is the Traxxas Velineon 3500 VXL Brushless Motor Rebuild Kit. This set includes two 5x11x4mm ball bearings, four 2.5x5mm buttonhead screws with threadlock, replacement front and rear bushings, and a plastic endbell cover. This can be used to refresh...$13 -
TRA2530A
Traxxas Front Bulkhead (Grey): Nitro & Electric Rustler & Stampede, Slash
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES:Gray nylon construction INCLUDES:One front bulkhead REQUIRES:Nothing. This is a direct replacement...$6 -
TRA2742
Traxxas Long Rod Ends & Hollow Ball Connectors (6)
This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...$4 -
TRA2578
Traxxas Buttonhead Screws 3x12mm (6)
These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...$250 -
TRA3678A
Traxxas Green Wheelie Bar Assembly for Slash, Stampede, Rustler, Bandit
This is the Traxxas Green Wheelie Bar for the Slash 2WD, electric Stampede 2WD, Skully, Craniac, electric Rustler, and Bandit vehicles.The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily...$15 -
TRA2419
Traxxas 48P Pinion Gear w/Set Screw: 19T
This is a Traxxas 19T 48P Pinion Gear. FEATURES:Metal constructionGrey in color INCLUDES:One 19T 48P Pinion GearOne Set Screw REQUIRES:Installation$3 -
TRA3931
Traxxas Flat-Head Hex Drive Machine Screws 3x8mm (6)
These are the Traxxas Flathead 3x8mm Hex Drive Screws. Features: Metal construction Black in color Includes: Six 3x8mm Flathead Hex Screws$250 -
TRA3655P
Traxxas HD Blue Front/Rear Suspension Arms (2) for 4x4 Slash Rustler Stampede
These are the Traxxas Heavy Duty Blue Front or Rear Suspension A-Arms (2) for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and XO-1 cars. These can be used as a rear arm upgrade for Stampede 2WD and Rustler 2WD trucks as well. This is a direct...$12 -
TRA3767T
Traxxas Orange Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA3643
Traxxas Rear Camber Link Turnbuckle, 49mm (2): Bandit, Rustler VXL & Stampede VXL
These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. Replace your non-adjustable camber links with these 49 mm (82 mm center to center) metal turnbuckles for trackside camber adjustment. Comes assembled...$750 -
INTT7983S
Integy Aluminum Gear Box Housing for the Traxxas Stampede, Rustler, Bandit
This is the Integy Silver Aluminum Gear Box Housing for the Traxxas Stampede 2WD, Rustler 2WD, and Bandit. This will fit XL-5 versions. Note: Not compatible with Traxxas wheelie bar or motor guard assembly FEATURES Silver in Color Made of Aluminum Very...$2699 -
TRA3691A
Traxxas Gearbox Halves, Grey: Rustler, Stampede, Slash
This is a Traxxas Left and Right Gearbox half with Idler Shaft for the Stampede, Rustler, and Slash vehicles. Features: Gray plastic construction Steel idler shaft Includes:One gearboxOne idler shaft$8 -
TRA3773A
Traxxas Rear Black Chrome All-Star Wheels w/Anaconda Tires: Stampede, Rustler
This is a pair of the Traxxas Rear All Star Black Chrome Wheels with Anaconda Tires for vehicles like the Stampede and Rustler XL-5 and VXL. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam inserts INCLUDES:One...$2995