Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
HRATE125
Hot Racing Differential Spool Locker for Slash 2WD, Stampede 2WD, Rustler, Bandit, Raptor
This is the Hot Racing Differential Spool Locker for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Traxxas Ford Raptor Slash 2WD trucks. This part replaces the differential gears for a locked differential and is recommended for off-road use only...$1388 -
TRA2072A
Traxxas 2072A Gear Set for 2070 & 2075 Servos
This is the Traxxas 2072A Gear Set for 2070 and Waterproof 2075 Servos. This is the stronger dark grey gear set for improved durability over the white gears. *Does not fit 2075 metal-gear servos Replacement part for4-Tec 2.0 AWD Chassis4-Tec 2.0...$4 -
TRA2912
Traxxas 45 Watt USB-C Power Adapter
This is the Traxxas 45 Watt USB-C Power Adapter Take advantage of the full USB-C standard with the Traxxas USB-C 45-watt power adapter. Not all power adapters are created equal. When combined with the 2916 Traxxas 100-watt USB-C cable, the Traxxas...$2495 -
TRA2745
Traxxas 3mm Lock Nuts (12)
This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially Licensed ReplicaDCB M41 WidebodyDrag Slash 1967 Chevrole C10...$2 -
TRA3793
Traxxas Steel Slipper Clutch Shaft: Slash, Rustler, Stampede
This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch set Specifications:Length: 1.98" (50mm)Diameter: .21" (5mm)$3 -
TRA2978
Traxxas DC Charger 5-Amp Fuses (2)
This is pack of Traxxas DC Charger 5-Amp Fuses (2). These are replacements for use in the 2-amp and 4-amp DC 12-volt cigarette-lighter style quick chargers included with many of the Traxxas electric and nitro vehicles.Fits Traxxas charger model 2974,...$149 -
TRA2431
Traxxas 48P Pinion Gear w/Set Screw: 31T
This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color INCLUDES:One 31 Tooth, 48 Pitch Pinion GearOne 3x4mm Set Screw (1.5mm hex size) REQUIRES:Installation SPECS:Length: .42" (10.5mm)Inside...$3 -
RPM80715
RPM Blue Front Caster Blocks for Traxxas 2WD Slash Rustler Stampede
These are the RPM Blue Front Caster Blocks for Traxxas electric Slash 2WD, Rustler, and Stampede 2WD trucks, as well as the Nitro Slash. This will fit XL-5 and VXL versions of the electric trucks.RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash,...$749 -
TRA2968X
Traxxas LiPo Cell Voltage Checker/Balancer with ID Adapter
This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...$3195 -
TRA2362
Traxxas Shock Rebuild Kit (2): T-Maxx & E-Maxx Shocks
This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFord F-150 Raptor R 4X4Ford Fiesta ST...$250 -
TRA5114
Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings (2)
This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmReplacement part...$4 -
TRA1942
Traxxas Rod Ends w/Hollow Balls & Screws
This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball screws18 hollow ball connectors Replacement Part...$7 -
RPM80385
RPM Blue Rear Bearing Carrier for Traxxas 2WD
These are the RPM Blue Rear Bearing Carriers for Traxxas Slash 2WD, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Bandit buggies. This replaces Traxxas 3752 bearing carriers, and requires use of 5x11x4mm bearings.Identical in strength and performance...$679 -
TRA3741A
Traxxas Aluminum Turnbuckle Camber Link Set (4) (Blue): Rustler, Stampede
This is the Traxxas Blue Aluminum Turnbuckle set for the Rustler, Stampede 2WD, Stampede 4x4, and Slash 4x4 trucks.FEATURES: Anodized aluminum construction Blue in color Black nylon ball ends INCLUDES:Two 39mm front camber linksTwo 49mm back camber...$22 -
TRA2743
Traxxas 3mm Hardened Set / Grub Screws (12)
This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBanditDCB...$3 -
GPM-SLA055-B
GPM Blue Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Blue Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
TRA3432
Traxxas Curved Tip Body Scissors
This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...$895 -
TRA6519
Traxxas Micro TQ 2.4GHz 3-Channel Receiver
This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...$2995 -
TRA5552X
Traxxas Slipper Clutch Rebuild Kit
This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits: 5556 pressure...$10 -
TRA1747G
Traxxas 4mm Nuts Green Aluminum Flanged Serrated Locknuts
This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...$750 -
TRA3739
Traxxas Hinge Pin Screw Set for Slash Rustler Stampede Bandit
This is the Traxxas Hinge Pin Screw Set for the Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, and Bandit vehicles.Includes:Two 3mm x 46mm screw pinsTwo 3mm x 40mm screw pinsTwo 3mm x 29mm screw pinsTwo 2mm x 27mm screw pinsTwo 2mm x 24mm screw...$450 -
TRA6509R
Traxxas TQi 2-Channel Radio with TSM Receiver
This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management (TSM) allows you to experience all the extreme power,...$9995 -
TRA2753X
Traxxas Rear Stub Axles (2): Bandit, Stampede, Rustler, Slash
These are the Traxxas Rear Stub Axles for the Bandit, Stampede, Rustler, and Slash. Features: Metal construction, black and silver in color Includes: Two rear stub axles and pins Specifications:Length: 1.65" (42mm)Diameter: .51" (13mm) at...$5 -
TRA1926
Traxxas Antenna Caps with Antenna Spool
This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...$2 -
TRA5186A
Traxxas Blue Aluminum Wheelie Bar Wheels & Rubber Tires
These are the Traxxas Blue Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, Stampede 4x4, and Bandit series vehicles.Traxxas...$1995 -
HRATRX15GS
Hot Racing Carbon Fiber Slipper Clutch Pads - Use in place of Traxxas 5352 or 5552
These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...$788 -
TRA6521
Traxxas Temperature and Voltage Sensor (Long)
This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...$12 -
TRA3351R
Traxxas Velineon 3500 4-Pole Brushless Motor (Waterproof)
This is the Traxxas Velineon 3500 4-Pole Brushless Waterproof Motor. This is the replacement motor found in many of the 1/10 brushless trucks, designed for use with the VXL-3s ESC. See full list of compatible trucks below.The Velineon 3500 Brushless...$8995 -
INTT7983B
Integy Blue Aluminum Gear Box Housing for Traxxas Stampede, Rustler, Bandit, Slash
This is the Integy Blue Aluminum Gear Box Housing for the Traxxas Stampede 2WD, Rustler, Slash 2WD and Bandit. This will fit XL-5 versions.Note: Not compatible with Traxxas wheelie bar or motor guard assemblyFEATURES Blue in Color Made of Aluminum Very...$2699 -
TRA2981
Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo Charger
This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...$8995 -
TRA2640
Traxxas Chrome Suspension pins, 44M (2) w/E-Clips
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...$250 -
TRA3767G
Traxxas Green Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA3762A
Traxxas 3762A XX-Long Grey Ultra Shocks (2)
This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more. Traxxas oil-filled Ultra Shocks utilize X-rings for a...$18 -
TRA1747A
Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4)
This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4). These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...$750 -
RPM73752
RPM Black Front Bulkhead for Traxxas 2WD
This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
TRA3632A
Traxxas Blue Aluminum 30-Degree Caster Block Set: Rustler, Stampede, Slash
This is a set of Traxxas 30-Degree Blue Caster Blocks for the Traxxas Rustler XL-5, Rustler VXL, Stampede XL-5, Stampede VXL 2WD, Slash XL-5, Slash VXL 2WD, Nitro Slash. Traxxas aluminum caster blocks improve the appearance, ruggedness, and control...$1995 -
TRA3641A
Traxxas Front & Rear Camber Link Set: Rustler, Stampede
These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long links Specifications:ShortLength: 77 mm (3.03")Width: 9 mm...$3 -
TRA3644
Traxxas Front Camber Link Turnbuckle, 39mm (2): Stampede & Rustler VXL
These are the 39mm Turnbuckle Camber Links for the Traxxas Stampede and Rustler VXL. FEATURES Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDESTwo front 39mm (69mm center to center) turnbuckles and...$7 -
TRA8712
Traxxas Speed Bit Essentials 7-Pc Hex & Nut Driver Set 1/4" Drive with Handle & Pouch
This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...$6995 -
TRA2423
Traxxas 48P Pinion Gear w/Set Screw: 23T
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES:Pinion gear with set screw, Silver in color INCLUDES:(1) 23 Tooth 48 Pitch Pinion Gear(1) One 4mmx2mm set screw REQUIRES:Installation SPECS:Outer Diameter: 14mm (9/16")Inner Diameter: 11mm...$3