Slayer Pro 4x4

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull starter FEATURES:Steel construction INCLUDES:One roller...

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo 2.5, 3.3, T-Maxx 3.3, and E-Maxx 16.8V Trucks. FEATURES:Repairs damaged slipper clutches INCLUDES:(1) Spring(2) Nuts(1) Pin(1) Metal Plate(3) Pads(2) WashersInstruction...

This is the Hot Racing Super Duty Slipper Clutch for Traxxas Slash 4x4, Stampede 4x4, 1/10 Summit, E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, 1/10 Rally VXL, Revo 3.3, Slayer Pro 4x4, and T-Maxx 3.3 trucks. This replaces the Traxxas...

This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...

This is package of 24 Traxxas 1.5mm E-Clips. These are used across a large number of Traxxas vehicles to secure pins and other components.Includes: (24) 1.5mm e-clipsSpecificationsOutside diameter: .163" (4mm)Opening: .059" (1...

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas TQi 2.4GHz Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver and Bluetooth Wireless module included. The Bluetooth wireless module works in conjunction with the Traxxas Link App on Android...

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro, and other vehicles using the 2.5 and 3.3 engines...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is the GPM Racing Blue 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy Spacer...

This is a Traxxas Revo 2.5 and 3.3 Steel Suspension Hinge Pin Set for the front or rear of the truck.  There are enough pins included to replace the hinge pins in the front or rear of the truck.  To replace all of...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm) zip ties REQUIRES:Installing between tuned pipe and...

This is a pair of Traxxas Axle Carriers for Revo 3.3, E-Revo, E-Maxx, T-Maxx, Summit, Slayer. These are for use with 6x13mm ball bearings, or use the included bearing adapters to run 6x12mm ball bearings.Includes:One Left Axle CarrierOne Right Axle...

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3, E-Maxx 16.8V and E-Maxx Brushless, Revo 3.3, E-Revo and E-Revo Brushless trucks. FEATURES:Black plastic construction INCLUDES:Two drive yokesTwo 4x15mm Yoke pins REQUIRES:T-Maxx 3...

These are the Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features: Aluminum construction, red anodized in...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into the optional TQi Telemetry Expander to provide...

This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex Head DesignThreadlockIncludes: Four 4mm x 13mm Black...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Wing Tote 1/8 Scale Monster Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks.   FeaturesMade with 600 Denier...

This is the GPM Racing Blue 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10...

This is a Traxxas Front and Rear Body Mount Set for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, and Slayer trucks.  Included are the front and rear body mounts, front and rear body posts, and screws.

This is a Traxxas Brake Pad Set for the Revo 2.5, 3.3, and T-Maxx 3.3 trucks.  These outer calipers come with a bonded friction material. Inner and outer brake calipers with bonded friction material pads Replacement Part...

These are the Drive Shaft Joints for the Traxxas Revo. FEATURES:Steel universal joint set INCLUDES:Four Steel Universal blocksFour Steel Universal pinsTwo black steel set pinsFour steel hinge pinsFour steel bearing pinsEight 1.4mm...

This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...