Nitro Rustler

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is the GPM Racing Orange Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is the GPM Racing Black Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the Traxxas Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler. This gear is located in the transmission. Features: White nylon construction Steel shaft Includes:One 20 tooth idler gearOne idler gear shaft Specifications:Gear outer...

This is the Traxxas Rubber Exhaust pipe (N. Rustler /Sport/4-Tec) (Side Exhaust Engines Only) Rubber exhaust pipe for Nitro Rustler, Nitro Sport, and Nitro 4-Tec. (side exhaust engines only) Replacement Part ForTRX Pro .15Nitro Rustler Nitro Sport Nitro...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

These are the Traxxas 2760 Blue Aluminum Shock Caps. Each package includes two shock caps. These are for use with Traxxas 4760 and 4761 aluminum shocks.Fits these vehicles when running Traxxas 4760 and 4761 shocks:1/10 Monster Jam Trucks1/10...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 - 40X3mm pins2 - 48X3mm pins10 - 3mm e-clips

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Traxxas Spring Pre-Load Spacers Change the ride height on your vehicle with these spring pre-load spacers for Traxxas Ultra Shocks. Set includes the following spacers: 1 mm (2), 2 mm (2), 4 mm (2), and 8 mm (2). Replacement Part ForBandit...

This is the Traxxas Multi-tool (plastic) The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps. Replacement Part ForE-Revo VXL BrushlessHoss 4X4 VXLJatoRevoRustler 4X4 VXLRustler 4X4Slash 4X4 UltimateSlayer Pro...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...