Nitro Rustler

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light weight Specs:Teeth-70Pitch-32 Requires:Nothing, this is a direct replacement part. Comments:This is...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. Features two pre-assembled gray shock bodies...

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull starter FEATURES:Steel construction INCLUDES:One roller...

This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash...

This is a pair of the Traxxas Nitro Rear/Electric Front All Star Wheels and Anaconda Tires. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam inserts INCLUDES:One left and one right all-star wheels with anaconda...

This is a Traxxas EZ-Start 2 Replacement Motor and Pinion Gear.  This is used on vehicles like the T-Maxx 2.5, 3.3, Revo 2.5, 3.3, Jato, Nitro 4-Tec, Nitro Rustler, Nitro Slash, Slayer Pro, and other vehicles using the 2.5 and 3.3 engines...

This is a Traxxas Front Bumper. This bumper fits many different vehicles, including the Stampede 2WD, Rustler, Bandit, and many nitro vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles.Fits1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch.Includes: One 4 cell AA Battery Holder w/Receiver Connector...

This is the Traxxas Stub axle, rear, steel-splined constant-velocity (1)Replacement rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R)Accessory Part For:BIGFOOTHoss 4X4 VXLNitro RustlerRustler 4X4 VXLRustler 4X4Rustler VXLRustlerSlash 2WD...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a GPM Stainless Steel Replacement Stub Axle and CVD for SSLA1277RHA Driveshafts. *Joint replacement for GPM Racing #SSLA1277RHA only IncludesJoint - 1pcHex - 1pc3x3 Screw Shaft - 1pc

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the MIP X-Duty Rear CVD Drive Kit for the 1/10 Slash 4x4, Stampede 4x4, Rally VXL, Stampede VXL 2WD and Rustler VXL 2WD, Nitro Stampede, and Nitro Rustler.Includes2 - MIP Confetti Sticker, 2.185 x .65 Black1 - MIP Lube & Thread Gel Cup1 - MIP...

This is the GPM Racing Green Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction Anodized blue in color INCLUDESTwo Aluminum Rear Stub Axle CarriersTwo 3x3mm Set ScrewsTwo 3x12mm Flat Phillips Head ScrewsTwo...

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Wing Tote 1/8 Scale Monster Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks.   FeaturesMade with 600 Denier...

This is the RPM Black Front Suspension A-Arm Set for the Electric Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport vehicles.RPM Rear A-arms for the Traxxas Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport are finally here to strengthen the...

This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware).  Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...

This is the GPM Racing Gunmetal Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...

This is the GPM Racing Orange Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft...

This is the GPM Racing Red Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...

This is the GPM Racing Green Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the RPM Red Wide Front Bumper for Rustler, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give your...

This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...