Nitro 4-Tec

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is a Traxxas High Stall Clutch Set for the Traxxas T-Maxx .15, 2.5, 3.3, Revo 2.5 and 3.3 trucks.  A higher stall lets you rev the engine up higher before the clutch engages, for more power when you are taking off.

These are rubber cap diaphragms for Traxxas plastic shocks. These also work well with some Associated aluminum shocks. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet...

This is the Traxxas Wheel Hubs hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2) These 12 mm aluminum hex wheel hubs are both lightweight and tough as nails with brilliant blue anodizing. *Includes axle pins (2) Accessory part forDrag Slash...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFord F-150 Raptor R 4X4Ford Fiesta ST...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmReplacement part...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball screws18 hollow ball connectors Replacement Part...

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a pull-start such as this is a great way to cut some...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES:Blue silicone constructionFor use with pipes #5152 and #4452 INCLUDES:One pipe coupler REQUIRES:Installing on the vehicle with wire...

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200mAh.  Fully charged, it provides about 1 hour...

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...