Jato 3.3
-
TRA5234
TRX 2.5 & 3.3 Carb Body/Plug/O-Ring
This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 and 3.3 engines. FEATURES:Carb body constructed of composite material, inlet plug is aluminum, and O-rings are rubber INCLUDES:One Carburetor Body, Fuel Inlet Plug, and...$16 -
INTT3655
Integy T-Maxx 3.3 & Jato 56T 0.8 Mod Steel Spur Gear
This is the Team Integy 56-Tooth 0.8 Mod Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks. This is MUCH stronger than a plastic spur gear. The Integy spur gears feature color-coded rings to allow easy identification. Going to a...$1499 -
TRA4056
Traxxas Jato 2.5 & 3.3 Throttle Return Spring (2)
This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs. You don't want to run a truck without this on it.$225 -
TRA6551X
Traxxas Telemetry GPS Module 2.0
This is the Traxxas Telemetry GPS Module 2.0. For real-time, ultra-precise speed data, the GPS Module 2.0 is the answer. Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM...$9995 -
TRA5291
Traxxas TRX 3.3 Engine Wrist Pin & Wrist Pin Clips
This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.$350 -
TRA5529
Shim Set (4): Jato
This is a Traxxas Jato 2.5 and 3.3 Shim Set. This includes four silver metal hollow balls and four 3mm silver washers. These are for adjusting the roll center of the truck.$350 -
TRA5543
Steering Bellcranks: Jato
This is the Traxxas Jato 2.5 and 3.3 Steering Bellcrank and Servo Saver Set. FEATURES:Nylon constructionGray in color INCLUDES:One Left and Right Steering BellcrankOne Servo SaverOne Servo Saver SpringTwo Steering SupportsFour 4mm x 7mm x 2.5mm...$6 -
TRA6542
Traxxas 35mm Flywheel with Magnet for Telemetry (RPM)
This is the Traxxas 35mm Flywheel with Magnet for use with the TQi Radio System.FeaturesFor use with Traxxas glow powered vehiclesEquipped with a magnet that enables an RPM sensor to read RPM data IncludesTraxxas 35mm Flywheel with Magnet$8 -
TRA3967
Traxxas 3x10 Shoulder Screws (6): Jato
This is a set of six Traxxas 3mm x 10mm Shoulder Screws for the Jato 2.5 and 3.3 trucks.$350 -
TRA5460A
Traxxas Blue Aluminum GTR Shocks (4) for Jato, Revo, Summit, Slayer, XO-1
This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...$5995 -
TRA4118
18T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12 -
TRA5531
Front Suspension Arms, Left & Right: Jato
These are the Front Left and Right Suspension Arms for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Left Front Suspension ArmOne Right Front Suspension Arm REQUIRES:Assembly onto Vehicle$10 -
HRASJT253
Hot Racing 53-Tooth 0.8 Mod 32P Spur Gear for 1/10 E-Revo, Jato T-Maxx 3.3, Slash 4x4, Stampede 4x4
This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel construction- Black oxide coating for durability and...$2388 -
TRA8716
Traxxas Speed Bit 2-Pc Ball End Hex Drivers 2.0mm 2.5mm, 1/4" Drive
This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive. This set includes 2.0mm and 2.5mm ball end bits. The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...$2195 -
TRA8719
Traxxas Speed Bit 6-Pc 4-8mm Nut Driver Master Set with 1/4" Drive Premium Handle & Pouch
This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...$5995 -
TRA5461
Traxxas Variable Damping Kit, GTR Shocks: Revo 3.3 & E-Revo
This is the optional Variable Damping Kit for GTR Shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR. FEATURES Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of...$7 -
TRA5123
Bellcrank Bushings 4x7x2.5 (4): Jato
These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle$250 -
TRA1972
Traxxas Rear 2.2" Truck Lite Wheels: Jato, Rustler, Stampede
This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede. These are 2.2-inches in diameter, have a 12mm hex, and require 2.2" tires. ...$495 -
TRA5460R
Traxxas Red Aluminum GTR Shocks (4) for Jato, Revo, E-Revo, Summit, Slayer, XO-1
This is the Traxxas Red Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...$5995 -
TRA6516
Traxxas TQ 2.4GHz 2-Channel Transmitter
This is the Traxxas TQ 2.4GHz 2-Channel Transmitter. (Transmitter Only) Stock replacement transmitter for many Traxxas vehicles. 1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD ChassisBanditBIGFOOTBlastChevrolet Corvette...$5995 -
TRA5223
Traxxas TRX 2.5 & 3.3 Engine Bearings 7x17x5mm & 12x21x5mm
This is a set of replacement Traxxas Engine Ball Bearings for the TRX 3.3, 2.5R, and 2.5 Engines. This includes one 7x17x5mm and one 12x21x5mm engine bearing. These engines have been used in many of the Traxxas nitro vehicles.SpecificationsFront...$30 -
WGT381
WingTote Short Course Truck /Buggy Tote
This is the WingTote Short Course Truck and Buggy Tote. The Short Course Truck & Buggy Tote is one best values on the market. Upper Compartment: 24"L x 13.5"W x 4"HLower Compartment: 24"L x 13.5"W x 9"H FeaturesMade with 600 Denier Nylon that is...$5499 -
INTT7919B
Integy Aluminum Wheelie Bar (Blue): Jato 2.5 & 3.3
This is the Team Integy Blue Aluminum Wheelie Bar for the Traxxas Jato 2.5 and 3.3 trucks. This looks awesome, and it helps prevent your high-performance Jato truck from flipping over backwards onto its lid. This prevents damage to...$1999 -
TRA5591
Left & Right Gearbox Halves: Jato
This is a set of Traxxas Jato 2.5 andThese are the Left and Right Gearbox Halves for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Left Gearbox HalfOne Right Gearbox Half REQUIRES:Assembly onto Vehicle$5 -
TRA4120
Traxxas 20T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12 -
TRA5573
Traxxas Assembled/Glued Rear Tires & Wheels: Jato 2.5 & 3.3
This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks. These are direct replacments for the originals, and if you are running on tar or cement, you know how quickly tires can go. ...$2495 -
TRA5460X
Traxxas Revo & Slayer Hard Anodized GTR Shocks (2)
This is a set of Traxxas Revo Assembled GTR Anodized Shocks (4). The GTR shocks work well with all versions of the Revo, including the 2.5, 3.3, E-Revo brushed & brushless, and the Slayer trucks. These are an excellent way to upgrade your...$6995 -
TRA5149
Front Wheel Aluminum Spacers (4): Jato
This is a set of four Aluminum Front Wheel Spacers for the Traxxas Jato 2.5 and 3.3 trucks. Set of four steel wheel spacers for Jato Twin-Spoke wheels. Replacement Part ForJatoNitro Rustler$275 -
TRA3433X
Traxxas Aluminum Handle Body Reamer
This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies. With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer. The tip features both metric (mm) and...$3995 -
TRA5551X
Traxxas Jato 2.5 & 3.3 Steel Driveshaft Kit
This is a High Performance Steel Driveshaft Upgrade Kit for the Traxxas Jato 2.5 and 3.3 trucks. These will help get more power to the ground than the power-robbing stock driveshafts. This is one of the first upgrades you should make to...$4495 -
TRA3038
Traxxas Jato On-Board Radio System Wiring Harness
This is a Traxxas Jato 2.5 and 3.3 On-Board Radio System Wiring Harness.$6 -
TRA5277
Traxxas Starter Shaft: T-Maxx 2.5, 2.5R, 3.3, & Revo
This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...$9 -
TRA5251
Traxxas TRX 2.5 & 3.3 Low-Speed Needle
This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro SlashJato 2.5 & 3.3Revo 2.5 & 3.3T-Maxx 2.5 & 3.3$350 -
TRA5538
Front/Rear Turnbuckles,Toe Links, 61mm (2): Jato
This is a set of two Traxxas Jato 61mm Front or Rear Turnbuckles or Toe Links for the Jato 2.5 and 3.3 trucks. These will work for the front or the rear. This includes two 61mm tie rods, four rod ends, and four hollow balls.$850 -
GPM-SLA054-GS
GPM Gunmetal Front Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
This is the GPM Racing Gunmetal Front Turnbuckle Camber Links for Traxxas 1/10 Slash 4x4 VXL, Rustler 4x4 VXL, Stampede 4x4 VXL, and Jato 3.3 trucks. These feature aluminum rod ends with a steel turnbuckle link for adjustability and strength.These are...$1990 -
TRA8710
Traxxas 13-Piece Metric Speed Bit Master Set
This is the Traxxas 13-Piece Metric Speed Bit Master Set 13-Piece Metric Speed Bit Master Set (8710)Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered...$12995 -
TRA4142X
Traxxas 40mm Aluminum Flywheel for Bump Starting
This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...$10 -
TRA2545
Traxxas Bellcrank Bushings: Nitro Rustler, T-Maxx, Slayer
This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.$3 -
TRA5558
Traxxas Front & Rear Suspension Tie Bars: Jato
This is a set of Traxxas Jato 2.5 and 3.3 Front and Rear Aluminum Suspension Tie Bars.$5 -
TRA6555
Traxxas Telemetry Expander Mount: Slash 4x4, Stampede 4x4, Rally, Jato
This is the Traxxas Telemetry Expander Mount 6555 for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Jato vehicles. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.Fits1/10 RallyJato 3.3Slash 4x4 (low-CG)Slash...$10