1/16 Rally

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Traxxas XL-2.5 Waterproof Electronic Speed Control (ESC) with Low-Voltage Detection (LVD), pre-wired with the Traxxas high-current connector. Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smooth throttle...

This is the Hot Racing Hardened Steel Lightweight 53-Tooth Spur Gear for Traxxas 1/16 Vehicles like the 1/16 E-Revo, 1/16 Slash 4x4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened steel construction- Replaces stock nylon...

This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

These are the Hot Racing Black Aluminum Piggyback Adjustable Rebound Shocks for Traxxas 1/16 E-Revo, Slash, Rally, and Summit. These will work on the brushed and VXL brushless versions of the vehicles.FEATURES:- CNC 6061-T6 billet aluminum shock damper...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks...

This is the Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized). This is Traxxas part number 7154XPart Number: 7154X / TRA7154XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...

This is the Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2). This is Traxxas part number 7020Part Number: 7020 / TRA7020Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...

This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065 / TRA7065Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas EZ-Peak 40W USB-C Auto-iD NiMH/LiPo Charger 4-Amp USB-C Multi-Chemistry Charger with Traxxas iD Technology Power and ConvenienceGet fast 4-amp multi-chemistry charging virtually anywhere with the Traxxas USB-C NiMH/LiPo battery...

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit Vehicles.  These fit the brushed and VXL brushless versions.FEATURESSteel constructed axles ...

This is the Hot Racing Aluminum Front Body Post Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. These will fit 1/16 brushed and VXL brushless versions of these cars.FEATURES:Aluminum ConstructionBlack in ColorCNC MachinedYOU WILL RECEIVE:Two...

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined aluminumBlack anodized finishYOU WILL RECEIVE:One...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). This is Traxxas part number 7093Part Number: 7093 / TRA7093Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...

This is the Traxxas Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1). This is Traxxas part number 7077RPart Number: 7077R / TRA7077RFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow Balls Specifications:Length: 67mm (2.6")Diameter: 5mm (0...

These are the optional Traxxas Green Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Lower Right Suspension ArmOne Lower Left Suspemsion ArmTwo Upper Left/Right Suspension Arms

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the WingTote Short Course Truck and Buggy Tote. The Short Course Truck & Buggy Tote is one best values on the market. Upper Compartment: 24"L x 13.5"W x 4"HLower Compartment: 24"L x 13.5"W x 9"H FeaturesMade with 600 Denier Nylon that is...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These will also work with...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of 6061-T6 aluminumBlack anodized finishYOU WILL RECEIVE:One...

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x41/16 Summit1/16 Summit...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm (0.20")

This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16...

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct replacement for Traxxas part 7030X.FEATURES:- Robust CNC...

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just change the mounting position.FEATURES:- CNC machined...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles.FEATURES:- Aluminum construction with 2 spring loaded...