Traxxas E-Revo 1/16 Trucks & Parts
As one of the most respected names in the RC world, Traxxas is constantly raising the bar in terms of innovation. Traxxas is the reason monster trucks are among the most popular models of the RC hobby; their 1/10 line of electronic models set the stage for off-road championships, and it also prompted pilots to become more involved in the hobby.
The original E-Revo trucks and buggies offered rugged performance, power, speed, and waterproof fun at a scale which pilots could use with ease. They would show the highest level of creativity in terms of design. Moreover, Traxxas made these models even more enticing with a full line of upgrades and interchangeable parts.
The 1/16 E-Revo Line
Traxxas scored a major hit when it introduced a smaller E-Revo scale. When you pilot 1/16 models, you do not lose any of the fun and excitement you get with the original E-Revo 1/10; in fact, the lower scale and lighter models make the RC piloting experience feel more nimble. In terms of models and parts, everything is the same as in the 1/10 line.
Even though models at the 1/16 scale are often called “minis,” they still pack a lot of power, speed, and performance. Let’s take a look at some of the E-Revo 1/16 models and parts in our catalog:
E-Revo Brushed 4WD Monster Truck
This model is great for RC pilots who are new to monster trucks. The low entry price makes this E-Revo very attractive, but there is also the Ready-to-Race (RTR) factor, which means that you will find everything you need to start having fun in the box. You can think of this monster truck as a starter kit that happens to pack the most powerful motor for 1/16 models; plus, you also get the controller, battery pack, and charger.
Small Body Clips
You will not have to spend much on body clips for the E-Revo 1/16 line; we recommend that you get a few 12-packs in your tool kit so that you can replace them on the spot if needed. With a nice range of body shells available, which include trophy trucks and stylish SUVs, you will not have any problems transforming the look of your models.
Titan 550 12-Turn Motor
This is the electric motor that is included in popular Traxxas models such as the Rustler and the Stampede. If you want to get more nimble performance from your E-Revo 1/16, the Titan 550 will very likely impress you with its integrated cooling fan, maintenance-free functionality, and smooth power output. Each Titan 550 motor comes with two leads and connectors for each of its two capacitors.
Learn More About Traxxas E-Revo 1/16 Models From RC Superstore
RC Superstore provides cars with extreme creativity in design and engineering. Whether you are a new or experienced RC pilot, chances are that the E-Revo 1/16 line from Traxxas will feel just right.
If you have questions about E-Revo models or their parts, please get in touch with the RC Superstore. We are proud to be a renowned Traxxas retailer, and we would love to share our knowledge of models, parts, accessories, and upgrades with you.
-
HRACSG1832
Hot Racing 32-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$588 -
TRA7245A
Traxxas Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair)
This is the Traxxas Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245APart Number: 7245A / TRA7245AFits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm...$4 -
HRAVXS128AR01
Hot Racing Black Aluminum Piggyback Adj. Rebound Shocks for 1/16 E-Revo, Slash, Rally, Summit
These are the Hot Racing Black Aluminum Piggyback Adjustable Rebound Shocks for Traxxas 1/16 E-Revo, Slash, Rally, and Summit. These will work on the brushed and VXL brushless versions of the vehicles.FEATURES:- CNC 6061-T6 billet aluminum shock damper...$3388 -
TRA7118X
Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends)
This is the Traxxas Push rods, aluminum (red-anodized) (4) (assembled with rod ends). This is Traxxas part number 7118XPart Number: 7118X / TRA7118XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon!...$1995 -
TRA7154X
Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized)
This is the Traxxas Wheel hubs, hex, aluminum (4) (blue-anodized). This is Traxxas part number 7154XPart Number: 7154X / TRA7154XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...$18 -
TRA7020
Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
This is the Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2). This is Traxxas part number 7020Part Number: 7020 / TRA7020Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch...$4 -
TRA7065
Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065 / TRA7065Fits1/16 E-Revo Brushed1/16 E-Revo VXL...$350 -
TRA6549
Traxxas Power Tap Connector, Voltage Sensor Plug w/ Hardware
This is the Traxxas Power Tap Connector, Voltage Sensor Plug w/ Hardware The power tap connector plugs inline between the battery and ESC to provide power to the optional LED power supply and telemetry voltage sensor. Includes (2) 2.6x8 mm...$7 -
TRA7054
Traxxas Steel Stub Axles (2): 1/16 Slash, E-Revo, Summit
These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit Vehicles. These fit the brushed and VXL brushless versions.FEATURESSteel constructed axles ...$5 -
TRA7138G
Traxxas Toe link, front & rear (molded composite) (green) (4)/ hollow balls (8)
This is the Traxxas Toe link, front & rear (molded composite) (green) (4)/ hollow balls (8). This is Traxxas part number 7138GPart Number: 7138G / TRA7138GFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming...$6 -
HRAVXS2901
Hot Racing Aluminum Front Body Post Set for 1/16 E-Revo, Slash
This is the Hot Racing Aluminum Front Body Post Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. These will fit 1/16 brushed and VXL brushless versions of these cars.FEATURES:Aluminum ConstructionBlack in ColorCNC MachinedYOU WILL RECEIVE:Two...$688 -
HRAVXS3201
Hot Racing Aluminum Rear Body Mount Post for 1/16 E-Revo, Slash
This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined aluminumBlack anodized finishYOU WILL RECEIVE:One...$988 -
TRA7061X
Traxxas GTR Hard-Anodized Shocks w/TiN Shafts for 1/16 E-Revo, Slash, Summit
This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies. Shock oil is included. These are the ultimate shock upgrade for 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks...$5995 -
HRACSG1828
Hot Racing 28-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...$588 -
HRAVXS21BR02
Hot Racing Aluminum Brake Disk w/Red Caliper for 1/16 E-Revo (Requires VXS2101 Knuckle)
This is the Hot Racing Aluminum Brake Disk with Red Caliper for the Traxxas 1/16 E-Revo (Requires Hot Racing VXS2101 Knuckle for mounting). This simulated brake disc gives the truck an awesome look, taking realism to the next level!FEATURES:Gives the...$888 -
TRA1747T
Traxxas Aluminum (4mm) Flanged and Serrated Nuts (Orange-Anodized) (4)
These are the Traxxas Flanged and Serrated Nuts, Aluminum (4mm) (Orange-Anodized) (4)Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...$750 -
TRA9917
Traxxas Medium RC Car/Truck Duffle Bag
This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...$11995 -
HRACSG1827
Hot Racing 27-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...$544 -
TRA7080
Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4)
This is the Traxxas Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4). This is Traxxas part number 7080Part Number: 7080 / TRA7080Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...$3 -
TRA7093
Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin)
This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). This is Traxxas part number 7093Part Number: 7093 / TRA7093Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford...$10 -
TRA7138X
Traxxas Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts)
This is the Traxxas Toe links, aluminum (red-anodized) (4) (assembled with rod ends and threaded inserts). The aluminum toe link set makes it easy to add strength and adjustability to your 1/16 scale E-Revo or Summit. These toe links come in a brilliant...$2995 -
TRA7019
Traxxas 4x8x3mm Sealed Ball Bearings (2) for 1/16 E-Revo, Slash
These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used in any vehicle where this size bearing is...$4 -
TRA7077R
Traxxas Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1)
This is the Traxxas Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1). This is Traxxas part number 7077RPart Number: 7077R / TRA7077RFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...$350 -
TRA6523
Traxxas Sensor, temperature and voltage (short)
This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...$12 -
TRA7270
Traxxas Tires, Canyon AT 2.2' (2)/ foam inserts (2)
This is the Traxxas Tires, Canyon AT 2.2' (2)/ foam inserts (2). This is Traxxas part number 7270Part Number: 7270 / TRA7270Fits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact...$1195 -
TRA2974
Traxxas 2-Amp DC Quick Charger
This is the Traxxas 2-Amp DC Quick Charger for 5-7 Cell, 6.0-8.4V NiMH batteries. This is intended for use with the Traxxas 2925X 1200mAh batteries with the ID connector.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Slash 4x41/16...$1995 -
TRA8719
Traxxas Speed Bit 6-Pc 4-8mm Nut Driver Master Set with 1/4" Drive Premium Handle & Pouch
This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...$5995 -
WGT381
WingTote Short Course Truck /Buggy Tote
This is the WingTote Short Course Truck and Buggy Tote. The Short Course Truck & Buggy Tote is one best values on the market. Upper Compartment: 24"L x 13.5"W x 4"HLower Compartment: 24"L x 13.5"W x 9"H FeaturesMade with 600 Denier Nylon that is...$5499 -
TRA5123
Bellcrank Bushings 4x7x2.5 (4): Jato
These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto Vehicle$250 -
HRACSG1831
Hot Racing 31-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$588 -
HRAVXS15501
Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for 1/16 E-Revo, Slash, Summit, Rally
This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave Digger, and 1/16 Mustang. These will also work with...$688 -
HRAVXS3001
Hot Racing Aluminum Rear Shock Mount for 1/16 E-Revo, Slash, Summit
This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of 6061-T6 aluminumBlack anodized finishYOU WILL RECEIVE:One...$988 -
TRA7023
Traxxas 1/16 Blue Aluminum Front & Rear Bulkhead Tie Bars & 2.5x6 Capscrew (1)
This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x41/16 Summit1/16 Summit...$6 -
TRA7118
Traxxas Push Rods (4) & Hollow Balls (8): 1/16 E-Revo
These are the Traxxas Pushrods and Hollow Balls for use on the 1/16 E-Revo VXL 4WD. Features: Molded composite construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 70mm (2.8")Diameter: 5mm (0.20")$6 -
TRA8716
Traxxas Speed Bit 2-Pc Ball End Hex Drivers 2.0mm 2.5mm, 1/4" Drive
This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive. This set includes 2.0mm and 2.5mm ball end bits. The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...$2195 -
TRA7121
Traxxas Wing mount/ hardware (1/16 E-Revo)
This is the Traxxas Wing mount/ hardware (1/16 E-Revo). This is Traxxas part number 7121Part Number: 7121 / TRA7121Fits1/16 E-Revo Brushed1/16 E-Revo VXL BrushlessMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...$5 -
HRACSG1830
Hot Racing 30-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...$588 -
TRA3433X
Traxxas Aluminum Handle Body Reamer
This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies. With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer. The tip features both metric (mm) and...$3995 -
TRA7118G
Traxxas Push rod (molded composite) (green) (4)/ hollow balls (8)
This is the Traxxas Push rod (molded composite) (green) (4)/ hollow balls (8). This is Traxxas part number 7118GPart Number: 7118G / TRA7118GFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16 SummitMore detail coming soon! Please...$6 -
TRA7155
Traxxas Rocker arm post, steel (4)
This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...$3