Traxxas TQi 2.4GHz 4-Channel Radio System with 5-Ch TSM Receiver & Bluetooth Wireless Module
This is the Traxxas TQi 2.4GHz Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver and Bluetooth Wireless module included. The Bluetooth wireless module works in conjunction with the Traxxas Link App on Android devices, Apple iPhone, iPad, and iPod Touch.
Traxxas Stability Management
Traxxas Stability Management (TSM) allows
you to experience all the extreme power, speed, and acceleration that was
engineered into your Traxxas model making it much easier to control on common
slippery surfaces such as dusty asphalt, smooth concrete, and even ice and snow.
Punch it off the line and TSM goes to work sensing the vehicle’s direction and
making steering corrections to provide straight-ahead full-throttle acceleration
without fishtailing, spinouts, and loss of control. TSM also works during
cornering, first making intuitive corrections to maintain your line, and then
allowing you to hammer the throttle earlier in the turn for much faster exit
speeds. Braking is dramatically improved as TSM works to keep you arrow straight
until you come to a complete stop.
The World's Most Advanced Ready-To-Race Radio System Now Connects Wirelessly to the Traxxas Link App
- Traxxas Link Wireless Module Pairs TQi with Android 4.4+ or Apple iOS 4.3+ Platforms
- Sleek 4-Channel Transmitter Design with Internal Antenna
- Equipped with Traxxas Link Wireless Module for Traxxas Link App Expandability
- 5-Channel Receiver with Traxxas Stability Management
- Traxxas Link Model Memory for up to 30 Models
- Simple 2-Button Programming Interface
- Built in Failsafe
- Direct Sequence Spread Spectrum Technology (DSSS)
- Uses only 4 AA Batteries
- Traxxas Link Application Provides Visual Access to:
- Real-Time Telemetry
- Customizable Dashboards
- Steering/throttle expo
- Steering/braking dual rate
- Servo reversing
- Endpoint adjustment
- Profile customization and sharing
- Manage an unlimited number of models with the Traxxas Link App
Total Control. Traxxas models deserve the world's most advanced Ready-To-Race radio system. The radio system is the sole connection between the driver and machine. It has to be precise, comfortable, powerful, and reliable. The Traxxas TQi radio system features a full compliment of tuning features; long-range, 4-channel versatility, high-output, 2.4GHz signal, access to real-time telemetry feedback, and proven Traxxas reliability for rock-solid performance. However, the most important and innovative feature may already be in your pocket. TQi is equipped with a revolutionary Traxxas Link Wireless Module that turns your Android or Apple iOS device into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks the mysteries of optimizing your radio system for ultimate vehicle control. The Traxxas Link Wireless Module is compatible with Android 4.4+ or Apple iOS 4.3+ platforms.
Gone are the clunky controls and blocky monochrome graphics of yesterday's radio systems. This powerful app gives you complete control over the operation and tuning of your Traxxas radio controlled model with stunning visuals and absolute precision. Install accessory Traxxas Link telemetry sensors on the model, and Traxxas Link displays real-time data such as speed, RPM, temperature, and battery voltage with brilliant graphics. Traxxas builds the world's fastest Ready-To-Race radio-controlled models. That level of performance demands precision control. Traxxas Link App gives you the tools for exacting adjustment and superior control while always keeping you informed on your model's status and speed.
Intuitive Android and Apple iOS Interface
Once you have created the perfect control settings for your model, you can save them as a profile that you can restore later, use on another model, or share with friends. If the track conditions change, simply re-tune your Drive Effects and save them as new profile.
Edit, Save and Share Drive Profiles
Traxxas Link simplifies orginization of you vehicle collection. With Traxxas Link and the TQi radio system, there's never a need to try and remember which model in memory needs to be selected to drive. Simply choose a model and any previously bound transmitter, power them up, and start having fun. Traxxas Link recognizes the model and picks everything up right where you left off. An unlimited number of vehicles can be permanently stored. The factory settings for all Traxxas models are pre programmed so adding a new Traxxas model to your transmitter is a snap. Traxxas models factory equipped with TQi Traxxas Link receivers are detected and configured automatically.
Real Time Telemetry
Traxxas Link collects and records real-time telemetry data as you drive. When you equip your model with optional telemetry sensors, the Traxxas Link dashboard comes to life showing you speed, battery voltage, RPM, and temperature. The application automatically detects and recognizes Traxxas Link sensors for easy set up and configuration. The dashboard is fully customizable with either dial or digital readout gauges. Up to nine gauges can be displayed at once. Set threshold warnings and log maximums, minimums, or averages. Use the recording function to document your dashboard view, with sound, so that you can keep your eyes on your driving and not miss a single apex. If you forget to record, simply touch Instant Replay anytime to capture the previous minute of fun and unexpected triumphs. The recordings can be named and saved to compare, review, and share with friends.
Manage up to 30 Models with Traxxas Link Model Memory
Traxxas Link Model Memory simplifies organizing your collection of vehicles. The TQi radio system automatically keeps track of what vehicles it has bound to and what settings were used for each. Traxxas Link provides a visual interface to see the transmitter's model history, name the models, customize their settings, attach profiles, and lock them into memory. Traxxas Link and TQi store settings for up to 30 models. Simply choose a model and any previously bound transmitter, power them up, and start having fun. Traxxas Link recognizes the model and picks everything up right where you left off. The factory settings for all Traxxas models are pre-programmed so adding a new model to your transmitter is a snap.
Innovative Traxxas Link Wireless Module
The TQi transmitter is equipped with a Traxxas Link Wireless Module that turns your Android or Apple iOS device (see device requirements below) into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module.
High Output Signal For Maximum Range
Top-level performance is what you expect from Traxxas, so the TQi 2.4GHz transmitter pumps out a strong, clear signal for optimum range. The 13ms frame rate and near zero latency results in instant steering and throttle response with precise, smooth control. TQi features an internal antenna, so there are no visual obstructions or external devices to break off.
Simple 2-Button Interface
All of the TQi 2.4GHz radio system's advanced functions are selected and adjusted using a simple 2-button interface. MENU and SET are all you need to navigate to the functions you wish to adjust, and the Status LED confirms each selection. Traxxas' advanced electronics give experienced drivers pro-level adjustability, without compromising simple operation when it's time to play and have fun.
The Multi-Function knob is key to the transmitter's adjustability. By using the MENU and SET buttons or the Traxxas Link App, a variety or performance parameters can be assigned to the Multi-Function knob for easy, on-the-fly adjustment. From the factory, the Multi-Function knob controls steering sensitivity, also known as exponential or "expo." The Multi-Function knob can also be set to control Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), and Throttle Trim. The Multi-Function knob can also be locked to prevent unwanted setting changes.
5-channel Micro Receiver with Fail-Safe Security
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual channel-1 outputs for easy installation in vehicles with dual steering servos - no Y-harness necessary! The integrated LINK button makes it fast and easy to bind the receiver, and the two-color LED indicates power-on and bind status for fool-proof control and convenience. Traxxas Link Model Memory allows the receiver to recognize up to thirty TQi 2.4GHz Traxxas Link enabled transmitters - just switch on and drive. In the event of signal loss due to an accidental switch-off or depleted batteries, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The Fail Safe programming is built-in and does not need to be set or activated. Three telemetry ports are incorporated in the 5-channel receiver to allow real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Plug-In Telemetry Sensors and Expander Module Available
TQi makes it easy to add telemetry capability to any Traxxas model when you equip the transmitter with the Traxxas Link Wireless Module and install Traxxas Link on your iOS device. TQi's included 5-channel receiver features ports for Voltage/Temperature and RPM sensors. A third port accepts the Telemetry Expander Module that allows up to 6 additional sensors to be added. There's even a GPS Module for satellite-measured speed (sensors, expander, and GPS module each sold separately). Sensor-ready gear covers or motor mounts custom-fit for your Traxxas vehicle install easily to precisely position the sensors for accurate detection of the "trigger magnets" built into the spur gear or flywheel required for your model. Just install the telemetry components and you're ready to go! The Traxxas Link application automatically detects the sensors installed in the receiver. Go to Telemetry Setup in the Traxxas Link application and touch Sync Now, and TQi automatically detects the sensors installed in the Expander Module. Only Traxxas makes telemetry so easy to install, view, and enjoy.
Steering and Throttle Sensitivity (Expo)
The TQi 2.4GHz transmitter's Multi-Function knob can be programmed to control Steering and Throttle Sensitivity, also known as exponential. This is a powerful tuning aid that can help tame a "loose" track, improve throttle control, and help you turn faster, more consistent laps. When set for minimum sensitivity (zero exponential), steering or throttle response is linear: the steering or throttle response will correspond exactly with the input from the transmitter's steering wheel. Turning the Multi-Function knob clockwise will result in "negative exponential" and decrease steering or throttle sensitivity by making the servo less responsive near neutral, with increasing sensitivity as the servo nears the limits of its travel range. The farther you turn the knob, the more pronounced the change in steering servo movement will be. The term "exponential" comes from this effect; the servo's travel changes exponentially relative to the input from the steering wheel. The exponential effect is indicated as a percentage - the greater the percentage, the greater the effect.
Steering and Braking Dual Rate
The Multi-Function knob can be set to control the amount (percentage) of servo travel applied to steering. Turning the Multi-Function knob fully clockwise will deliver maximum steering throw; turning the knob counter-clockwise reduces steering throw. Many racers set Dual Rate so they have only as much steering throw as they need for the track's tightest turn, thus making the vehicle easier to drive throughout the rest of the course. Reducing steering throw can also be useful in making a vehicle easier to control on high-traction surfaces, and limiting steering output for oval racing where large amounts of steering travel are not required.
The Multi-Function knob may also be set to control the amount of brake travel applied by the servo in a nitro-powered model. Electric models do not have a servo-operated brake, but the Braking Percentage function still operates the same way in electric models. Turning the Multi-Function knob full clockwise will deliver maximum brake throw; turning the knob counter-clockwise reduces brake throw. This is a very useful feature for preventing spin-outs due to brake lock-up on slick tracks; just dial out unwanted brake travel for more precise control.
Steering and Throttle End Points
The TQi 2.4GHz transmitter allows you to choose the limit of the servo's travel range (or its "end point") independently for left and right travel (on the steering channel) and throttle/brake travel (on the throttle channel). This allows you to fine-tune the servo settings to prevent binding caused by the servo moving steering or throttle linkages (in the case of a nitro car) farther than their mechanical limits. The end point adjustment settings you select will represent what you wish to be the servo's maximum travel; the Steering Percentage or Braking Percentage functions will not override the End Point settings.
Steering and Throttle Sub-Trim
The Sub-Trim function is used to precisely set the neutral point of the steering or throttle servo in the event that simply setting the trim knob to "zero" does not completely center the servo. When selected, Sub-Trim allows finer adjustment to the servo output shaft's position for precise setting of the neutral point. This is particularly useful for high-speed vehicles such as the Nitro 4-Tec 3.3, Jato 3.3, and VXL/Castle brushless models that require laser-straight tracking when the steering wheel is at
Traxxas Link is designed for use with Android 4.4 and up or iOS 4.3 and later. Traxxas Link is compatible with Android equipped devices, iPhone (4S & later), iPod touch (5th generation and later versions), iPad (3rd generation and later versions), or iPad mini. For full functionality, Traxxas Link requires a Traxxas TQi transmitter with Traxxas Link Wireless Module and a TQi receiver installed in the model. Telemetry functions require Traxxas telemetry sensors to be installed on your model.