E-Flite Park 480 Brushless Outrunner Motor (1020Kv)

Key Features

• Perfect match for 3D park flyers weighing 20-30 oz (565-850 g)
• Ideal for scale park flyers 25-35 oz (710-990 g)
• Ideal for models requiring up to 275 watts of power
• High Torque, direct drive alternative to inrunner brushless motors
• Includes mount, prop adapters, and mounting hardware
• External rotor design, 4mm shaft can easily be reversed for alternative motor installations
• Slotted 12-pole outrunner design
• High quality construction with ball bearings and hardened steel shaft
• Quiet, lightweight operation

Overview

The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers 20- to 30-ounces (565- to 850-grams), scale park flyers 25- to 35-ounces (710- to 990-grams), or models requiring up to 275 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF and Mini Funtana 3D ARF , and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF.

Specifically this 1020 Kv option can handle more current than the 920 Kv version so it is a much better option when match with the Thunder Power Pro-Lite cells.

Specifications:
Type: Brushless Outrunner
Size: Park Flyer
Bearings or Bushings: Ball Bearings
Wire Gauge: 16
Recommended Prop Range: 10x7 to 12x6
Voltage: 7.2 to 12
RPM/Volt (Kv): 1020
Resistance (Ri): .06 ohms
Idle Current (Io): 1.10A @ 8V
Continuous Current: 22A
Maximum Burst Current: 28A (15 sec)
Cells: 6 - 10 Ni-Cd/Ni-Mh or 2 - 3S Li-Po
Speed Control: 25A to 40A Brushless
Weight: 87g (3.1 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 4mm (.16 in)
Overall Length: 33mm (1.30 in)