null

E-Flite PA-20 Pacer 10e ARF Electric RC Airplane

  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
  • E-Flite PA-20 Pacer 10e ARF Electric RC Airplane
$16999
This item earns 170 Reward Points!
Brand:
Model: EFL2790
This is the E-Flite PA-20 Pacer 10e Almost-Ready-to-Fly Electric RC Airplane. The PA-20 Pacer was Piper’s answer to the four-seat family airplanes offered by Cessna and Stinson who were capitalizing on the post-war general aviation boom. Eager veterans used their G.I. bill to earn pilot certificates and needed a “family car of the air” for travel that the venerable J-3 Cub used in training simply could not accommodate. The E-flite PA-20 Pacer 10e ARF airplane replicates the full-scale Pacer for RC pilots who want an iconic scale experience great for hopping out of small fields. Not only does its outline and color scheme closely honor the original, you also get high-end interior appointments, scale looking landing gear, plus optional flaps for greater control at a wider range of speeds. Even more satisfying is the short amount of time you’ll need for this classy lady to be flight-ready.

From the authenticity of its traditional construction to the richness of its UltraCote finish and high-gloss fiberglass cowling, the E-flite PA-20 Pacer 10e ARF delivers a scale model with outstanding flight characteristics so that you can look like a class-act both in the air and on the ground. The recommended E-flite power system was designed around popular and economical 3S Li-Po batteries to provide great performance for scale maneuvers as well as picture perfect touch-n-gos.

Features

  • Classic lines and highly accurate scale proportions
  • Laser-cut balsa and plywood construction
  • Genuine Hangar 9 UltraCote covering
  • Ready-to-mount the E-flite Power 10 brushless motor
  • Pre-painted fiberglass cowl and wheel pants
  • Scale cockpit detail (pilot not included)
  • Four-channel control with optional flaps
  • Two-piece, plug-in wing with carbon fiber wing tube
  • Scale wire landing gear assembly
  • Large, easy-access belly hatch

Specifications

Wingspan: 51.0 in (1300mm)
Overall Length: 36.3 in (920mm)
Wing Area: 451 sq. in. (29.1 sq. dm.)
Flying Weight: 46.4-48.0 oz (1300-1360 g)
Motor Size: 10-size brushless outrunner
Radio: 4+ channel radio system (5 if using flaps)
Servos: (4) digital sub-micro servos required, (6) required for flap operation
Prop Size: 10 x 5 - 12 x 6 thin electric propeller
Spinner Size: 1-3/4 in (45mm)
Speed Control : 40-amp brushless
Recommended Battery: 11.1V 3S 1800-2200mAh LiPo
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes

Requires

4+ channel transmitter (5 if using flaps)
4+ channel receiver (5 if using flaps)
(4) sub-micro servos, plus (2) sub-micro servos if using optional flap operation
10-size brushless outrunner motor
40-amp brushless ESC
Propeller
Standard propeller hub or up to a 1.75-inch spinner
Flight battery
Charger for flight battery

You May Also Like