This is the Team Checkpoint TC-1030 DC Computerized Pro Racing Battery Charger.  The TC-1030 charger is capable of charging LiPo, NiCd, and NiMH batteries.  This charger also has the ability to discharge and has a motor break-in function.  This charger comes with a Five-Year Limited Warranty from the manufacturer.

Five-Year Limited Warranty!

Racers put winning first - and so does the TC-1030 Pro Charger. Like all winners, it delivers what the competition doesn't - and does it all from a footprint that's 60% smaller than the unit racers are probably using now. Yet, even with more charging modes, LiPo compatibility and new motor functions, the TC1030 Pro can also offer racers an edge in economy. And that makes the best little charger in racing, one of the biggest values in R/C.

Features:

• LiPo-, NiCd- and NiMH-compatible!
• Five fast-charge modes, including 3-step and 4-step.
• Features linear and high-amp, custom 20A and 30A pulsed discharge functions, plus a Dead Short mode for extreme conditioning of high-powered racing packs.
• Includes motor test and two break-in modes: 1-step - and a 4-step mode with programmable voltage and cool-off times!
• Offers 10-pack memory - and the ability to recall data for up to 10 full cycles.
• Voltage cut-off adjusts from as little as 1mV or 2mV to a maximum of 25mV.
• Twin cooling fans improve efficiency and extend life!

SPECIFICATIONS:
Input voltage: 11-15V DC

Battery
Chemistry/# of Cells: 1-10 cell NiCd/NiMH, 1-4 cell LiPo/Ion
Capacity: 100-9,900mAh
10 Battery Memory Settings in Charger

Charging
Fast-Charge Modes: linear, reflex, impulse, 3-step & 4-step
Current Range: 0.1-10A (NiCd/NiMH)
Termination Modes: peak detection (0-15mV, NiMH; 0-25A, NiCd), cc/cv (LiPo/ION), thermal cut-off (all types; optional*)
Trickle current: 0-500mA (NiCd/MH only)
Top-off current: 0-1,000mA (NiMH only)

Discharging
Current Range 0.1-10A linear (2C max. for LiPo/Ion), 20A & 30A (all)
Special Feature: Dead Short Mode
Voltage Cut-Off: 0.1-1.1V/cell (NiCd/NiMH), 2.5-3.7V/cell (LiPo/Ion)
Temperature Cut-Off: 50-132°F (10-55°C)

Cycling
# Continuous Cycles: 1-10 (NiCd/NiMH)
Cool-off time: 1-30 minutes

Motor Functions
Modes: 1-step & 4-step break-in, Motor Test
Voltage: 1-8V
Amperage: Up to 20 (at 1.5V)
Run/Cool-Off Times: 1-180 minutes

Display
Type: Blue back-lit LCD w/graphing functions & adjustable contrast
Displays: voltage curves for charging & discharging; input/output voltage; charge/discharge current; charge/discharge time; battery capacity resistance & temperature

Miscellaneous
Case Construction: All-aluminum, w/twin cooling fans.
Size: 5.5 x 5.9 x 1.8 in (140 x 150 x 45 mm)
Weight: 24.5 oz. (695 g)
Output Connectors: banana jacks (attached), plus two adapters (banana plugs to large alligator clips and banana plugs to Deans Ultra Plug (male).
Programming: Dial for menu navigation, function selection; twin push buttons
Set-up/Safety Features: Light/sound cues; safety timer
* requires optional Temperature Sensor if using thermal cut-off (TCPP9101)

Includes: Team Checkpoint Computerized Pro Battery Charger and Discharger with two charge adapters-alligator clips and a Deans Male Ultra Male, two alligator clips and  instruction manual

Requires: 12V DC power from a 12V power supply or battery.  To achieve absolute maximum output power capabilities the
DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions).

Charge Leads/Adaptors for this charger:
GPMM3148 - Banana Plugs to Dean's Ultra Male
HCAP0101 - Futaba J Tx and Rx Charge Leads (except 9VAP)
HCAP0102 - Futaba J Tx and Rx Charge Leads (9VAP only)
HCAP0105 - JR Rx and Tx Charge Leads
HCAP0106 - Hitec Tx and Rx Charge Leads
HCAP0108 - Charge Leads-Banana Plugs to Alligator Clips
HCAP0110 - 9V Style Tx Connector, Futaba -J Rx Charge Lead
HCAP0310 - Banana Plugs (3 pair)
HCAP0320 - Heavy Duty Banana Plugs (2 pair)

Features five charge modes - and rates that run from 0.1-10A!

Discharges with custom 20A & 30A pulsed currents for real-world conditioning.

A unique, 4-step motor break-in mode enables racers to program voltage and cool-off time for each step - and count on 20A current, even at 1.5V!