This is the HPI Racing Nitro Star .15 cu in (2.49cc) T-15 Pull Start Engine.  This engine has been used in the Nitro MT 2, Rush Evo, & Nitro 3 Evo kits.  These are good engines, and the price is hard to beat!  This engine produces a whopping 1.2 HP at 29,000 RPM!

FEATURES:

• ABC construction
• 6mm Dual Needle Rotary carb
• Side exhaust
• Powder black case
• Tall powder gray heatsink head (10 fins)
• Aggressive porting
• Standard shaft

INCLUDES: Glow plug, brass flywheel collet, air cleaner, instructions & decals

SPECS:    Carburetor:     Rotary type, 6mm
Ports:          3
Weight:         10.2oz (290g)
Displacement:   .15 cu in (2.49cc)
Horse Power:    1.2hp @ 29,000 RPM
Bore:           15.0mm
Stroke:         13.6mm

Distance between mounting holes front to back:         0.43" (11mm)
Distance between mounting holes side to side:          1.2"  (31.5mm)
Overall width including mounting flanges               1.6"  (40mm)
Overall height from bottom of crancase to top of head: 3.9" (100mm)
Overall length from back of recoil to end of shaft:    3.5"  (88mm)
Diameter of head at largest point:                     1.9"  (49mm)
Length of shaft:                                       0.75" (19mm)
Length of threaded portion of shaft:                   0.47" (12mm)
Distance between exhaust mounting holes:               1.1"  (27.2mm)

This engine also includes mounting holes in the bottom of
the crankcase. The specs for these are as follows.
Distance between mounting holes side to side:         0.72" (18.2mm)
Distance between mounting holes front to rear:        0.83" (21mm)

COMMENTS: This engine will also accept the HPI87120 HPI Roto Start System. This engine will easily & directly fit into most nitro cars or trucks that accepts small block (.12-.15) engines with pull starters.