| This is the Hobbico Digital Voltmeter Mk III battery tester. This tests 4, 5, and 8 cell R/C batteries in a no-load or a simulated R/C load setting. These are a must for all R/C pilots. This can prevent a crash of your airplane or helicopter due to a dead battery.
FEATURES:
-
Custom designed LCD shows voltage in clear 1/2" numerals, plus customized characters to easily determine the meter setting and condition of the battery under test
-
The LCD not only displays the voltage, but the voltage mode, "OK" and "RECHARGE"
-
Test 5 cell packs, in addition to 4- and 8-cell batteries
-
Includes a common 9V internal battery, located inside an easy-access compartment
-
Built-in simulated R/C load of 250mA for each setting
-
Includes two input controls: a small pushbutton on the left side of the case, and a 3-position slide switch on the face of the meter
-
Switch load OFF and use it as a true Digital Voltmeter
-
Measures DC voltage up to 19.99V, making it versatile enough for any DC battery - transmitter/receiver packs, starter batteries, and glow starter batteries
-
A 10 minute auto-timer shuts the unit OFF automatically if left ON by accident, to help prevent unwanted battery drain
-
Rubber grip for no-slip handling
-
Color coded banana jacks, compatible with most common test leads
-
One year limited warranty.
INCLUDES: One Digital Voltmeter MkIII with 9V battery pre-installed One Instruction Sheet
REQUIRES: Test or charge leads with banana plugs such as the Hobbico pre-assembled test and charge leads (search our store for the bold numbers below) HCAP0101 - FUTABA J Tx/Rx CHARGE LEADS (NOT FOR 9VAP) HCAP0102 - FUTABA J Tx/Rx CHARGE LEADS 9VAP ONLY HCAP0104 - OLD AIRTRONICS Tx/Rx CHARGE LEADS HCAP0105 - JR Tx/Rx CHARGE LEADS HCAP0106 - HITEC/AIRTRONICS Z Tx/Rx CHARGE LEADS HCAP0107 - CHARGE LEAD GLOW-STARTER - ALL HCAP0108 - CHARGE LEAD W/ ALLIGATOR CLIP(2) HCAP0109 - VOLTMETER TEST PROBES (2) HCAP0110 - CHARGE LEADS 9V Tx PLUG and FUT J Rx
SPECS: Supply voltage: 9V DC Input test settings under load: 4.80V DC (4 cell battery) 6.00V DC (5 cell battery) 9.60V DC (8 cell battery)
Optional load current: 250mA each setting Maximum voltage measurement: 19.99V DC Length: 4.5" (113mm) Width: 2.75" (67mm) Height: 1.0" (27mm) Weight: 4.7 oz (136g) |