This is the Hobbico Accu-Glo II Power Panel.  This panel powers starters, chargers, fuel pumps, glow starters, and monitors the condition of glow plugs.

This power panel comes with a hard plastic case or can be mounted to any field box with a standard sized cutout for a power panel.

FEATURES:

• Fuel Pump switch from original Accu-Glo was replaced by separate color-coded push-buttons for "FILL" and "EMPTY." Press once to Start, again to Stop
• Four LEDs, 11.0V, 11.5V, 12.0V, and 12.5V indicate Field Battery condition-an improvement from one light that glowed either green or red on original version
• Glow Starter Charger keeps unit fully charged at a constant 300-400mA rate
• Automatic Glow Power Management section tells when glow plug is fully charged and if plug continuity is good
• Adjustment dial allows automatic glow heat customization to the model; once set the unit maintains proper heat regardless of glow plug's condition
• Two year limited warranty

INCLUDES:

• One Hobbico Accu-Glo II Power Panel
• Two alligator clips
• Two Black and two Red banana plugs
• Two plastic plug covers
• Four 3mm x 10mm self-tapping screws to mount panel to Field Box

SPECS:
Input Voltage: 11-13V DC
Input Voltage Indicators: Four LEDs
Starter Jacks-Output Voltage: 12V DC
Fuel Pump Controls: Yellow "FILL" pushbutton; Red "EMPTY" pushbutton
Glow Heat Power Circuit: Automatic heat adjustment
Glow Heat Status Indicators: "HOT" and "COLD" LEDs
Glow Heat Continuity Indicators: "GOOD" and "BAD" LEDs
Glow Starter Charger Current: 300-400mA constant current (not timed)
Glow Starter Output Jack: Glow driver mounting lug with LED
Fuse: 7.5A spade type
Weight:     8.3oz (235g)
Dimensions: 6" x 3.7" (152 x 94mm)

REQUIRES:
12V battery for power