This is the 1/10 scale electric powered, radio controlled, ready to run Hot Bodies Cyclone S On-Road Drift Car with the Toyota Trueno AE86 Body

FEATURES:

• Chassis: Composite nylon tub 0.12" (3mm) thick, with composite nylon upper and middle deck, bulkheads, pivot blocks and shock towers
• Drive: Four wheel two belt drive
• Motor: Saturn 27T Brushless Motor (HPIC1144)
• Electronic Speed Control: Self programming
• Radio: 27MHz AM 2-channel pistol grip
• Ball Bearings: Full set 20 total, 18 in drivetrain, 2 in steering
• Shocks: Four oil filled, plastic bodies
• Shock Towers: Composite plastic with strengthening ribs
• Gearbox: Open front and rear
• Differentials: Externally adjustable ball type
• Motor Mount: Aluminum
• Body: Painted and trimmed with decals, constructed of polycarbonate
• Bumper: Front foam
• Suspension: Four wheel independent, high traction suspension arms, variable front kick up/anti-dive, varible anti-squat
• Tires: Treaded hard drift compound 2.5" (63mm) diameter, 1" (26.4mm) wide
• Wheels: Volk TE37 chrome 5-spoke, 12mm hex with capture pins
• Camber Tie Rods: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
• Caster: Adjustable front and rear, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis, carbon plastic caster blocks
• Ackerman: Adjustable, Ackerman describes the effect of the inside front wheel turning tighter than the outside front wheel Roll
• Center, Ride Height and Down Stops: Adjustable front and rear Bump Steer, Anti-Dive/Kick-Up: Adjustable
• Steering: Ball bearing supported, single bellcrank
• Servo Saver: Spring loaded, incorporated into steering bellcrank

• Warranty: Two year limited, valid only in the US, Canada and South America

INCLUDES:
Hot Bodies Cyclone S On-Road Drift Car with Toyota Trueno AE86 body, 2-ch radio with servo, ESC, and instructions

REQUIRES:
Radio Batteries: Eight AA size
Battery: 6-cell stick
battery Charger: Timed or peak
Misc. Items: Building and track equipment

SPECS:
Vehicle-
Length: 14.4" (365mm)
Width:  7.5" (190mm)
Weight:  1.80bs (820g) varies with equipment used
Wheelbase: 10.1 - 10.2" (256 - 259mm)
Drive Ratio: 2.4375:1
Body-
Length: 17.5" (445mm)
Width:  7.7" (195mm)
Height:  4.7" (120mm)