This is the Futaba S3004 Light Weight, Ball Bearing Servo. This basic servo is used in cars, boats, or where standard servos are used.

Note: This servo is NOT designed for use with glow powered helicopters.

This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.

FEATURES:

• Single ball bearing on output shaft
• Precise tight fit throughout the geartrain
• Being standard size and lightweight, it fits many applications
• Nylon gears

• One year warranty

INCLUDES:
One S3004 standard servo

REQUIRES:
Does not include any horns (use FUTM3551 for the horn set) If mounting hardware is needed, order Screws (FUTM2250), Eyelets (FUTM3650) and Grommets (FUTM2346)

SPECS:
Speed:  0.23 sec/60° @ 4.8V
0.19 sec/60° @ 6.0V
Torque:  44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6.0V
Length: 1.59" (40.4mm)
Width:  0.78" (19.8mm)
Height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire