This is the Futaba 7C 2.4GHz Helicopter Radio System with the R617FS FASST Receiver and Four S3001 Ball Bearing Servos.  This has a smooth throttle stick for helicopters, but it does come with the airplane programming as well.  The R617FS receiver weighs in at only 7 grams when the case is removed, making very versatile.  The 7C sits squarely in the middle ground in computer systems. It's a system that offers much of the 9C's set-up versatility matched to 4-channel ease of use. Like many other Futaba computer radios, it offers Dial n' Key simplicity for programming, and it also has the 2.4GHz FASST system for an unparalleled RF link.  The 7C 2.4GHz radio system is also compatible with the R606FS receiver.

 The Futaba 7C 2.4GHz is a Full Range System - Ideal for all types of R/C aircraft!

Features:

• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts every two milliseconds virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
• Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
• Newly designed Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly navigating through menus and programming
• Airplane & Heli software included
• Assignable switches/functions
• Up/down stopwatch
• Mode 1-4 selectable (modes 3 and 4 available via transmitter software)
• Large 72 x 32 LCD screen with adjustable contrast
• 10-model memory
• 6-character model naming
• Digital trims, trim memory, EPA, subtrims and servo reversing (all channels)
• Dual/Triple rates* (aileron/elevator/rudder)
• Exponential (aileron/elevator/rudder)
• Adjustable throttle cut
• Fail-safe
• NT8S600B 600mAh Tx NiCd w/dual-output charger
• Trainer system (cord required)
• Flap switch
• Retract switch
• Variable rate knob (channel 6)

Includes:
Futaba 7C 2.4GHz Transmitter
R617FS FASST 7-Ch Receiver
NR-4RB 1000mAh 4.8V NiCd Receiver Battery
FBC-19B(4) 120V Battery Charger
Four S3001 Standard Ball Bearing Servos
NT8S600B 600mAh 9.6V NiCd Transmitter Battery
Switch Harness w/Charge Cord
Black Transmitter Neck Strap
Servo mounting hardware and instruction manual

7C 2.4GHz Transmitter Specifications:
Current Drain: 170mA

R617FS FASST Receiver Specifications:
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 0.34oz  (9.8g) with case, 0.25oz  (7g) without case

S3001 Standard Ball Bearing Servo Specifications
Length: 1.6" (41mm)
Width:   .8" (20mm)
Height: 1.4" (35mm)
Weight: 1.6oz (45.1g)
Torque: 44 oz-in at 4.8V,  57 oz-in. at 6V
Transit: .23 sec/60° @ 4.8V, .19 sec/60° @ 6V

Airplane Programming Menu Includes:

• Ailevator feature simplifies dual servo set-ups on elevators
• 3 programmable mixes
• Flaperon
• Flap trim
• Air brake
• Elevator to flap mixing
• V-tail mixing
• Elevon mixing
• Aileron to rudder mixing
• Snap roll