Features:

• New design considers operability and weight balance
• PLL synthesized system is easy to change the frequency just by selecting a desired frequency on the transmitter screen.
• LCD display and four edit keys for easy data setup
• Two function groups- frequently used functions/ system functions
• HRS Transmission Modulation (HRS) provides three times faster response when used with digital servos
• Fail Safe (on HRS mode only) returns servos to a neutral or preset position in the event of interference or malfunction
• R303FHS receiver instantly detects whether transmitter is in HRS or FM mode
• Ten model memory
• Programmable switches and buttons, programmable mixing
• Digital steering and throttle trims
• Steering dual rates and steering speed
• Steering/throttle exponential
• ABS braking
• Brake mixing
• Steering, brake/throttle and 3rd channel End Point Adjustment
• Charge jack for optional transmitter NiCds
• Throttle acceleration
• Racing timer
• Condition 2 select
• Tension adjustment function
• Trigger stop function
• High luminosity blue LED pilot lamp (can select brightness)

Includes:

• 3PM-FS transmitter with synthesized module and antenna
• R303FHS synthesized receiver
• Instruction manual
• Battery box
• Switch harness
• Mini screwdriver
• Warranty card

Requires:

• Servos (Digital required in HRS mode)
• 8 AA cells or NT8F700B NiCd battery for tranmsitter
• 4 AA cells or NiCd pack for receiver

Transmitter Specifications:

• Operating System: FM/PPM, HRS/FM
• Transmitting Frequency: 27Mhz
• Power Supply: 9.6V NiCd
• Current Drain: 250 mA or less

Receiver Specifications:

• Length: 1.56" (39.5mm)
• Width: 1.09" (27mm)
• Height: 0.57" (14.5mm)
• Weight: 0.60oz (17g)
• Receiving Frequency: 75MHz (channels 61-90)
• Intermediate Frequency: 455kHz
• Power Supply: 6.0V (NiCd 5 cells)
• Current Drain: Approx. 95mA

Comments:
This radio is sold without servos and requires digital servos and 6V ONLY when using an HRS receiver. Non-digital servos are fine on PPM/FM. For optional NiCd pack use either FUTM1463 or FUTM1440. If you would like to use optional NiCds with your transmitter, we recommend an assembled pack, not individual cells. If individual NiCd cells are used the battery tray could be damaged during charging.