This is the Futaba 7CHF 7-Channel Helicopter Computer Radio with the R168DF FM Receiver and four S3151 Digital Servos.

FEATURES:

• 10-model memory and 6-character model naming
• Same Dial n' Key programming found on Futaba's 9C systems
• Basic menu for everyday sport flying, Advanced menu for more complicated routines
• Heli and airplane control layouts in FM or PCM
• Heli specific features:
• Throttle Curve (5 points, Idle up 1 & 2)
• Pitch Curve (5 points, Idle up 1 & 2)
• Revo Mixing
• Gyro
• Hovering Throttle
• Hovering Pitch
• Throttle Hold
• Offset
• Three programmable mixes
• VR switch controls proportional 7th channel
• EEPROM memory feature retains settings even when transmitter battery is disconnected or removed
• Stick Mode Select Feature-IMPORTANT, For full mode changes, transmitter must be sent to the
• Futaba Service Center
• Dual Rates on 4 Channels
• Triple rates available if using the 3 position switch
• Full function trainer system, trainer cord not included, use FUTM4415 or FUTM4420
• One year limited warranty

INCLUDES:
One Futaba 7CHF 7-Channel Helicopter Radio with transmitter and receiver crystals and; Four S3151 Digital Servos  FUTM0310
R168DF FM receiver
1000mAh NR-4RB Rx battery  FUTM1380
FBC-19B (4) Wall charger   FUTM1830
Servo accessory bag, frequency flag set, neck strap, ON/OFF switch, and instruction manual

REQUIRES:
Charging batteries overnight before use

SPECS:
Transmitter:
Transmitting Frequency: 72MHz band
Modulation: FM/PPM or PCM, switchable
Power Supply: 9.6V NT8S600B NiCd battery
Current Drain: 250mA
R168DF Receiver:
Narrow Band: 20kHz
Power Requirements: 4.8 to 6V (shared with servos)
Dimensions: 1.1x2.2x.8" (28.5x55.5x19.8mm)
Weight: 1oz (28g)
S3151 Standard Size Digital Servo:
Control System: Pulse width control, 1.52ms neutral
Power Requirement: 4.8V
Output Torque: 43 oz-in (3.1 kg-cm) at 4.8V
Operating Speed: .21 sec/60° @ 4.8V
Size 1.59"x.79"x1.42" (40.5x20x36.1mm)
Weight: 1.48oz (42g)

COMMENTS:
Although this is the 7CHF system, the transmitter has a T7CHP sticker on it meaning it is PCM or FM/PPM compatible.

For additional helpful information, consider purchasing the Traplet Publications Futaba 7C The User's Guide, TPNZ1007.