This is the Mini FuntanaX ARF from E-Flite

The Mini FuntanaX features light wing loading through increased wing area, wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability.

Features:
Tapered thickness airfoil for improved aerodynamic performance
Optional Side Force Generators (SFG's) included
Designed for use with E-flite’s Park 480 Brushless Outrunner Motor
Balsa/lightweight plywood construction covered in genuine UltraCote
Wing fillets
Aluminum landing gear and steerable tail wheel
Easy-access magnetic battery hatch
Factory-painted fiberglass cowl and wheel pants
Assembles in just a few evenings
Generous wing area for lighter wing loading—26% larger than original Mini Funtana
Large control surfaces for precise control in high-alpha flight

Overview:
The Mini FuntanaX is another in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.

To create the new Mini FuntanaX™ ARF, E-flite® began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted
with an E-flite Park 480 brushless outrunner, the Mini FuntanaX is capable of superb vertical performance.

Requires:
6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
40A Brushless ESC
12x6 Electric Prop
Battery & Charger

Specifications:
Wingspan: 43 in (1092mm)
Overall Length: 40.5 in (1028mm)
Wing Area: 447 sq in (28.8 sq dm)
Flying Weight: 27–29 oz (765–822 g)
Motor Size: Park 480 BL Outrunner
Radio: 6-channel TX and micro RX
Servos: 4 sub-micro
Trim Scheme Colors: True Red (HANU866), White (HANU870), Deep Blue (HANU873), Silver (HANU881)
G (center of gravity): 3 3/4" (95mm) behind the leading edge
Prop Size: 12x6 Electric
Hardware Included: Yes
Speed Control : 40A Brushless
Recommended Battery: 11.1V 3-cell 2100mAh Li-Po
Control Throw (Ailerons): Low 1" (25mm) Up/Down or High 1 7/8" (48mm) Up/Down
Control Throw (Elevator): Low 3/4" (19mm) Up/Down or High 2 5/16" (58mm) Up/Down
Control Throw (Rudder): Low 1 3/4" (45mm) Left/Right or High 2 3/4" (70mm) Left/Right
Approx. Assembly Time: 4 hours