This is the Castle Creations Phoenix-10 amp Sensorless ESC for Brushless motors. This speed control is specifically designed for Brushless applications. NOT to be used with Brushed motors. Doing so will ruin ESC.

FEATURES:

• Extremely low resistance (.013 Ohm)
• High rate (11kHz) switching
• Up to 10A continuous current with proper air flow, 15A surge
• Five to eight cells with four micro servos
• Up to ten cells with three micro servos
• 16 cells max with BEC disabled
• Dynamic braking ensures folding props fold properly
• BEC (1.5A) provides power to receiver and servos-eliminates need for a separate receiver battery

• User programmable features:

  • Low voltage cutoff
  • Auto-LiPo setting automatically sets 3V/cellfor 2-4 cell LiPo packs
  • Over-current protection
  • Brake type
  • Throttle range
  • Timing advance
  • Cutoff type
  • Soft start ramp up
  • Runs motor in forward or reverse
  • Auto motor in cutoff with reset
  • Safe power on arming program ensures motor won't accidentally turn ON
  • Low torque soft start prevents damage to fragile gearboxes

  • Auto Shut Down when signal is lost or radio interference becomes severe

INCLUDES:
Instruction sheets
Phoenix 10 ESC

REQUIRES:
Battery connector

SPECS:
Length: 1"    (25.4mm)
Width:  3/4"      (19mm)
Height: 1/8" thick (3mm)
Wire Length:   4" (102mm) motor ends     5.5" (140mm) battery end
5.5" (140mm) servo wire with Universal connecter