| This is the Castle Creations Mamba Monster Monster Truck and Extreme 1/8 Scale Brushless 2650 kV Neu-Castle Motor and ESC Power System. If you are looking for a high-performance setup for your 1/8 scale truck or buggy, this is the answer! This system includes a coupon redeemable directly through Castle for FREE Castle Link Setup.
FEATURES:
-
Motor: Neu-Castle 2650 KV motor designed for 1/8 scale Buggy applications
-
Intended for 4S (16.8 Volt) operation
-
Standard Neo rotor on a 5mm shaft
-
High end bearings for trouble free operation
-
Machined integrated cooling fins
-
4 pole, slotted, brushless motors wound 1 turn in a Y configuration
-
ESC: Designed for extreme 1/8 scale monster truck applications
-
Profiles can be custom designed on a PC with the Castle Link System
-
Infinitely adjustable throttle and brake curves with timing advance
-
Punch Control allows dialing in horsepower where needed
-
Brake Strength allows straight tracking under hard braking
-
Drag Brake helps entry into corners
-
Start Power for smooth launches
-
Programmable cutoff voltage for LiPo usage
-
On/Off switch
-
Universal receiver connector
INCLUDES:
2650kv Neu/Castle motor
18T Pinion gear
Mamba monster speed control
Castle Link
REQUIRES:
Installing into vehicle
SPECS:
Motor: Length: 67.78mm (2.67")
Diameter: 39.98mm(1.57"), 41.78mm (1.6") with fins
Weight: 121g (0.27lb)
Shaft Diameter: 5mm (.2")
Max Input Volts: 16.8V
Amp Rating: 120
Wire Lead Guage: 10 ga
ESC:
6 cell LiPo
Continuous: N/A
Resistance: .0003 Ohm
Brake: Proportional with adjustable curve
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm)
Weight: 4.3oz (121g)
Connector Type: 6.5mm
COMMENTS:
Use 2200Kv motor for Monster Truck and 1/8 scale Truggy Applications |
