This is the Axial AX10 Scorpion 1/10 Rock Crawler Kit.  This truck is the first of its kind.  Previously the only way to build a competition capable rock crawler was to buy bits and pieces of several different kits here and there, taking as long as several months just to get the right parts together before you could even start the build. Now you can get everything in one box and in a matter of a few hours build time be able to hit the rocks with the Axial AX10 Scorpion 1/10 Rock Crawler Kit. Axial has designed a completely new kit from the ground up.  Each detail has been well thought out and provides you with a solid base to work with.  It even includes the Rock Lizard tires and Rockstar beadlock wheels with green rings as shown in the picture!

Features

• Complete competition ready kit
• All new solid axles that feature an improved driveshaft angle and castor as well as class leading steering throw
• Aluminum Chassis plates with a molded nylon skid plate
• Ultra compact and lightweight transmission
• Full time locked four wheel drive
• Full Ball bearings
• Overall gear ratio range from 15:1 to 74:1
• Transmission: 2.6:1 Ratio - Center Mounted, Designed to place weight of motor as low as possible while still allowing a wide range of gearing choices.  Transmission is locked with no differential action and uses hard anodized aluminum outdrive shafts
• Differentials: Locked style (spool)
• Sealed front and rear gearboxes
• Transmission: Single-speed
• Tires: Axial 2.2 Rock Lizards
• Wheels: Axial 2.2 Rockster Beadlocks
• Suspension: 3 Link - All links constructed of lightweight and strong aluminum
• Drive Shafts: Universal front and rear composite drive shafts with hardened metal yolks
• Tires: 2.2" (56mm) wide Rock Lizard, 4.75" (120.65mm) diameter
• Wheels: 2.2" (56mm) wide Rockstar beadlocks with green rock rings 2.51" (64mm) diameter

Chassis

• Wheelbase: 12" ~ 12.6"  (304mm~320mm)
• Overall Length: 17.25"  (438mm)
• Width: 10"  (254mm)
• Height: 6.125"  (156mm)
• Weight: 3.5 lbs  (1588g)
• Articulation: 70°
• Ground Clearance: 3.125"  (79mm)

Body (supplied unpainted)

• Length: 17.25"  (438mm)
• Width: 7.125"  (181mm)
• Height: 5.25"  (133mm)

Electronics

• Radio: 2 Channel
• Servos: 1 (Standard Size)
• Speed Control
• Motor: 540/550 Size
• Battery : 7.2v Stick Pack

Requires: (items available at right under "Accessories")
2-Channel with 1 Servo
Speed Control
540/550 size motor
7.2V 6-cell stick pack battery
Charger for 7.2V battery
Misc. building and track equipment

Axles The axles have been designed with many features that are not available from other choices on the market.  Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration, the result is a stronger better axle that will last.  An aluminum diff locker is included along with hardened drive shafts and axles.

Chassis

The AX10 Scorpion chassis is lightweight and stiff.  Twin 2.0mm aluminum side plates are tied together with aluminum posts and a molded nylon skid plate/transmission plate.  The chassis was made as small and compact as possible to cut weight as much as possible.  A simple battery/radio tray makes installation of your electronics quick and easy.  Wheel base is adjustable from 304mm ~ 320mm.