This is the 1/10 scale electric powered, radio controlled, ready to run Team Associated RC10B4 RS (Race Spec) off-road buggy kit.

FEATURES:

• Chassis: All-new molded composite, low center of gravity
• Transmission: 2.6:1 laydown type, high-torque capacity
• Bearings: Full set shielded, 14 total
• Shocks: Oil-filled hard anodized aluminum
• Radio: 27MHz AM Team Associated XP 2 with throttle ATV, steering and throttle trim and reverse, metal gear steering servo, transmitter does not have charge jack
• Speed Control: LRP Ai digital with reverse and auto setup
• Motor: Team Associated Reedy Radon 17 turn with composite impact resistant motor guard
• Dog Bones: CVD dog bones designed into rear suspension to push the B-4 out to the maximum width for more traction
• Front Tires: Proline M3 racing compound "wide-body" 1" (26mm) wide, 3.2" (82mm) diameter
• Rear Tires:  Proline M3 racing compound, 1.8" (45mm) wide, 3.4" (86mm) diameter
• Front Wheels: Proline Velocity white 0.94" (24mm) wide, 2.4" (61mm) diameter
• Rear Wheels: Proline Velocity white 1.5" (38mm) wide, 2.4" (61mm) diameter
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Suspension: Symmetrical suspension arm design with all four arms the same length, captured hinge pins-no E-clips
• Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel
• Body: Painted Proline buggy style with adjustable clear rear wing color scheme is either red or blue with yellow flames, see COMMENTS Forward-swept front end design provides maximum front end ground clearance
• Slipper Clutch: High-torque capacity double-sided provides finer adjustment
• Battery Position: Adjustable with new style battery hold down strap
• Built-in servo saver

INCLUDES:
One pre-assembled RC10B4 RS buggy kit with oil-filled shocks, tires, foam inserts, wheels, 81 tooth spur gear, steel turnbuckles, 23 tooth pinion gear, 17 turn motor, electronic speed control, 2-ch pistol grip AM radio w/steering servo, painted body, clear rear spoiler, decals and photo-illustrated manual

REQUIRES:
Radio Batteries: (8) AA size
Battery Pack: Six cell flat with standard connector
AC/DC Charger: Timed or peak for 6-cell battery
Building and track equipment

SPECS:
Length: 365mm  (14.375")
Rear Track: 254mm  (10")
Front Track: 248mm   (9.75")
Height: 108mm   (4.25")
Wheelbase: 270mm  (10.625") adjustable
Ground Clearance: 25.4mm (1")

COMMENTS:
It is not possible to request a specific radio channel or color when ordering because they are supplied by the manufacturer at random.