This is the DuraTrax Blue Pit Tech Deluxe Car Stand.  This is a convenient workstation for most 1/8, 1/10 and 1/12 cars and trucks.

FEATURES:

• Sturdy dark blue, high-impact polystyrene stand w/rotating top plate
• Dropped center section accommadates models w/uneven chassis bottoms
• Molded rubber inserts in the upper plate to grip chassis securely
• Built-in holes to keep shocks handy when rebuilding
• Easily accessible extra-large parts tray in base
• Stand can be disassembled & stored flat for easy transport/storage
• It has a pivot shaft holder and pegs molded into stand so pieces will stay together in the field bag

INCLUDES:
One Blue Polystyrene Top Plate w/Black Rubber Grips
One Blue Polystyrene Base w/Aluminum Pivot Shaft Support
One Aluminum Pivot Shaft

SPECS:
Assembled Size-         Storage Size-
Length: 7-7/8"          Length: 7-7/8"
Width:  6-1/8"          Width:  6-1/8"
Height: 4-1/4"          Height: 2-1/2"

Vehicles with larger tires may need them removed to clear surface below

This is a Standard Slot-Head Engine Tuning Screwdriver.  This is a must have for any serious nitro/glow engine owner.  It will make adjustments easier and more accurate, for better performance.  The long length of this screwdriver allows you to reach in to most tight areas without getting too close to a hot engine.

FEATURES:

• Durable, magnetized, heat-treated, black tip tops off the precision ground chrome vanadium steel shaft
• Comfortable handles are made of polypropylene, with a rubberized finish that enables modelers to get a firm grip
• Top of handle has a hexagonal design to keep it from rolling away when laid on a work surface
• Ideal for tuning/adjusting high- /low-speed needle valves and throttle stop screws on glow powered radio controlled engines

INCLUDES: One Standard Slot-Head Engine Tuning Screwdriver 3.2 x 120mm

SPECS:
Blade Width:    3.2mm
Shaft Length:   120mm (4.75")
Overall Length: 195mm (7-5/8")

COMMENTS: This slot head screwdriver has a flat blade tip.

This is the Hangar 9 Covering Sealing Iron.  This has precise thermostatic control up to 450 degrees, to suit all of your covering needes.  It has a contoured teflon-coated shoe to reach all of those hard to get at areas.  Also included is a safety stand.  These are a must for all builders.

This is the Hangar 9 Z-Bend Pliers for airplane control linkages.  This will greatly improve the quality and control of your linkage bends, and is much more accurate than using a standard pliers.  The heat-treated steel pliers make Z-bends quick and easy, and the rubber-coated handle provides a comfortable, firm grip.

Features:

• Makes Z-bends quickly and easily
• Heat-treated steel construction
• Rubber-coated handles for a firm grip
• Perfect for all control linkage needs
• 2-year warranty