WingTote 50" Double Wing Panel Bag

This is the Wing Tote 50" Double Wing Bag. This is designed for R/C planes with two separate wing panels. Each wing panel must be under 50" in length.

Features:

• Constructed of 600 Denier nylon, durable and water resistant
• Pocket with Velcro flap for wing pole or joiner is located on front of bag
• Inside is lined with heavy fleece to protect plane covering
• 3/8" (10mm) thick closed cell foam between outer nylon and inner fleece
• Center also has layer of 3/8" (10mm) thick closed cell foam enclosed in fleece and secured by Velcro that separates the two wings
• Woven shoulder straps are spaced to balance on modeler's shoulder with 1-1/2" (38mm) webbing for comfort
• Two zippers go around three sides to allow wing to be inserted easily - zippers don't go completely around the sides reducing the chance of wing falling out in case bag is accidentally left open

Includes: One Wing Tote 50" Double Wing Bag

Specifications:
Length: 50" (1270mm)
Width at Wide End: 28" (711mm)
Width at Narrow End: 19" (483mm)