Home > Cars, Trucks, & Parts > Electric Motors & ESCs >

  Tekin RS Gen2 ESC & 10.5T Redline Brushless Motor Combo
Tekin RS Gen2 ESC & 10.5T Redline Brushless Motor Combo for 1/10 Scale


 
Our Price: $229.99


Availability: Out of stock
Product Code: TEKTT2426
Qty:

Description
 

Tekin RS Gen2 ESC with 10.5T Redline Brushless Motor

This is the Tekin RS Gen2 ESC and 10.5T Redline Gen2 Sensored Brushless Motor Combo.  Designed with performance in mind, this Gen2 setup is perfect for 1/10 scale racing applications.  With reliability and precision, this brushless motor and speed control system can be used with LiPo, NiMH, or NiCd battery packs.  This is the perfect setup for 1/10 scale 2WD short course trucks!


Tekin RS Gen2 ESC

Features:

  • Ultra-smooth and Precise Throttle and Braking Control
  • Compatible with Sensored/Sensorless Brushless and Brushed Motors
  • Easily Access Programming, Anywhere, Anytime
  • Datalogging Capability
  • High Voltage Programmable BEC
  • EZ Access HotWire Programming Port
  • HotWire PC Interface for Advanced Programming and Updating
  • D2: Dual Drive Mode Technology
  • On-Board Temperature Indicator
  • HDAC: High Density Copper PCB's
  • Sensor Plug for Precise Commutation with all Motors
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune Programming
  • One-Touch Radio Calibration

Programming
High Voltage BEC (6.0v/7.4v)*
Drag Brake (13 steps)
Brake / Reverse Strength (13 steps)
Current Limiter (none + 12 steps)
Neutral Width (13 steps)
Timing Profiles (5 preset - 2 custom*)
Adjustable Throttle and Brake Minimums
Custom Throttle Curves
Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
Voltage Cutoffs (none, 2S, 3S, Custom)
Timing Boost and Turbo when used with Hotwire
ROAR Race Spec "Blinky" Mode
Save, Load and Share custom ESC setup files*
Save, Load and Share Data Log files*
Extensive Tuning via Tekin Hotwire PC Interface


*Requires HotWire Sold Separately


Specifications
Controls:
Forward/Brake/Reverse
Input Voltage: 4-9 Cells, 2S-3S Lipo
BEC: 6.0v / 7.4v 5.5amps
Motor Limit Brushless Mode: 8.5 Turn, 540 2-pole (36mm)
Motor Limit Brushed Fwd Only Mode: 10 Turn
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Max Current: 120amps per phase
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.0 x 1.3 x .51in (25.4 x 33 x 12.9mm)
Weight: 2.0oz / 48g with wiring


Tekin 10.5T Redline Gen2 Motor

Features
  • Specifically designed for 1/10 scale 2S LiPo and stock racing
  • Legal in major governing racing bodies
  • Dual plug sensor wire harness for all sensored and sensoreless systems
  • CNC machined T 6061 billet aluminum heatsink can with anodized endbell plates
  • High RPM precision bearings
  • High purity copper windings
  • Adjustable timing
  • Neodimium sintered magnet
  • 120 day limited warranty through Tekin beginning at date of purchase

Specifications
Weight: 6.3oz (180g)
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 51.8mm / 2.03"
Bearing Dimensions: front: 4x13x5mm rear: 1/8 x 3/8 x 5/32"


Includes: RS Gen2 Brushless ESC with Instructions, Motor and Receiver Wires, 10.5T Redline Gen2 Motor with Sensor Wire


Share your knowledge of this product with other customers... Be the first to write a review