This is the Hitec HS-755HB 1/4 Scale Karbonite
Gear Servo with the Universal Connector. The universal connector means that
this servo will work with all current JR, Futaba, Hitec, and Airtronics Z
receivers and wiring.
This servo has the
revolutionary Karbonite gears. This is perfect for larger R/C applications and
features dual ball-bearings with a water and dust resistant case. The HS-755HB
183 oz./in. of torque at 6 volts.
Specifications:Type: AnalogApplication: 1/4
Size ModelsTorque: 152.8 oz-in @ 4.8V; 183.3 oz-in @
6VSpeed: 0.28 sec/60 deg @ 4.8V; 0.23 sec/60 deg @ 6V, at no
loadLength: 2.32 in (59.0mm)Width: 1.14 in
(29.0mm)Height: 1.97 in (50.0mm)Weight: 3.88 oz
(110g)Bushing Or Bearing: BearingBearing: DualMotor
Type: 3 PoleConnector Type: UniversalGear
Material: KarboniteCurrent Draw Idle: 8mACurrent Draw
Stall: 1500mA @ 4.8V; 1800mA @ 6VVoltage: 4.8V to 6.0V
Note: Be aware that high
vibration gas (not glow) engines combined with large control surfaces and large
throws (3D models) can put undue strain on the gears. Metal geared servos are
recommended for these applications even if under 12lbs.
Enter your email address!