Home > Airplanes & Parts > Electric Motors & ESCs >

  E-Flite Power 46 Brushless Outrunner Motor, 670Kv
E-Flite Power 46 Brushless Outrunner Motor, 670Kv


 
List Price: $118.99
Our Price: $89.99


Product Code: EFLM4046A
Qty:

Description
 
This is the E-Flite Power 46 Brushless Outrunner Motor, 670Kv. Ideal for 40- to 46-size airplanes weighing 4 to 7 pounds (1.8-3.2 kg), 25- to 40-size 3D airplanes up to 5 pounds (2.2 kg), or models requiring up to 925 watts of power.

Features
  • Equivalent to 40- to 46-size glow engine for planes weighing 4-7 lb (1.8-3.2 kg)
  • Ideal for 25- to 40-size 3D airplanes up to 5 lb (2.2 kg)
  • Ideal for models requiring up to 925 watts of power
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Includes mount, prop adapters and mounting hardware
  • External rotor design-6mm shaft can easily be reversed for alternative motor installations
  • Slotted 14-pole outrunner design
  • High-quality construction with ball bearings and hardened steel shaft
  • Quiet, lightweight operation

Overview
The Power 46 is designed to deliver clean and quiet power for .40 to 46-size sport and scale airplanes weighing 4 to 7 pounds (1.8–3.2 kg), 25- to 40-size 3D airplanes up to 5 pounds (2.2 kg), or models requiring up to 925 watts of power. It’s an especially good match for Hangar 9 .40-size trainers like the Alpha .40 (HAN2450), Arrow .40 (HAN2625) and warbirds like the T-34 Mentor 40 (HAN2425). Also a great match for sport planes like the Ultra Stick 40 (HAN1675 or HAN1690), Seagull Spacewalker 40 (SEA2050), and smaller sport 3D planes like the Twist 40 (HAN2650).

Specifications
Type: Brushless outrunner
Size: Replacement for 40- to 46-size glow engines
Bearings or Bushings: One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing
Wire Gauge: 14
Recommended Prop Range: 12x8 to 14x10
Voltage: 14.4 to 19.2
RPM/Volt (Kv): 670
Resistance (Ri): .04 ohms
Idle Current (Io): 3.90A @ 10V
Shaft Diameter: 6mm (.24 in)
Overall Length: 55mm (2.15 in)
Weight: 290 g (10.0 oz)
Overall Diameter: 50mm (2.00 in)
Diameter: 50mm (2 in)
Length: 55mm (2.15 in)
Continuous Current: 40A
Maximum Burst Current: 55A (15 sec)
Cells: 12–16 Ni-MH/Ni-Cd or 4–5S Li-Po
Speed Control: 60A brushless

You will need
60A brushless ESC
4S-5S Li-Po or 12- to 16-cell Ni-MH/Ni-Cd
12x8 to 14x10 prop

Tech Notes
Hardware is included with the purchase of this motor.
Maximum operating temperature: 220 degrees Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.


Share your knowledge of this product with other customers... Be the first to write a review