Axial 1/10 RR10 Bomber 4WD Rock RacerThis is the Axial 1/10 RR10 Bomber 4WD Ready-to-Run Rock Racer with 2.4GHz radio system, 35T brushed motor, and AE-5 LiPo compatible receiver.
Axial R/C Inc. is extremely pleased to partner with Randy Slawson, Bomber Fabrication’s owner and two-time King of the Hammers rock racing champion! For this rig, we took everything we learned from building the industry’s first all plastic tube chassis rig and drew upon mountains of inspiration from enthusiasts to go next level! The Axial RR10 Bomber is not just another plastic tube chassis Wraith update - it merely adds to our line of successful 2.2 rock racing vehicles. While visually this rig is a race replica of the Bomber Fab KOH rock racing rig, one of the unseen features is the front mounted battery tray under the hood making for easy access and weight right where you asked for it! This makes swapping the batteries in this rig a quick and easy process, especially for those enthusiasts participating in the ultra endurance series within Axialfest! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10 specific transfer case for optimal driveline efficiency. We’ve also included a full set of BFGoodrich BAJA T/A KR2 tires along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels. We've included a variety of shock mounting points for running dual shock setups and more suspension tuning options. For additional rear suspension tuning, you'll find a sway bar mount connected to the cage, under the fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Standard features include durable front and rear WB8 HD Wildboar driveshafts, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears, a 3-channel radio system, realistic scale details including molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels and graphics, and a fully licensed scale tube chassis.
RANDY SLAWSON - BOMBER FABRICATION
At the age of 12, Randy Slawson was first introduced to the off-road lifestyle by his uncle. Trips to the mountains for the sole purpose of exploration and camping became one of his favorite pastimes. As he grew older; and of driving age, his interest in off-road vehicles evolved into a passion. Upon moving from Oregon to Southern California, he discovered the desert and all of its beauty. He naturally migrated toward work in the off-road industry. After working several years for a sand car manufacturer, he became one of the lead instructors at the top metal fabrication school in southern California. His off-road passion took a turn toward the rocks, where he was heavily focused on trying to conquer the rock crawling “Hammer” trails of Johnson Valley. His skill set and equipment had evolved rapidly, so did the weekends’ goals. His target shifted from being able to complete the trails, to seeing how fast he could complete the trails. This evolutionary process armed Randy with all the necessary skills and equipment to compete in the races held in Johnson Valley. Competing on a shoe string budget, he learned to respect the equipment, yet push it to its very limit. In 2010, Randy started Bomber Fabrication; a Southern California based metal fabrication business. His Bomber chassis are heavily respected in the rock racing community due to their simplicity to work on, their striking good looks and undeniable success in the desert. He has been named “King of the Hammers” twice, once in 2013 and again in 2015.
FEATURES BFGOODRICH BAJA T/A KR2 TIRES - S30 COMPOUND
In the full-size world of off-road racing, BFGoodrich tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
KING ADJUSTABLE ALUMINUM SHOCKS
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
FORWARD MOUNTED EASY ACCESS BATTERY TRAY
Remove two body clips to release the front hood for access to the adjustable battery compartment. The compartment features ample room for securing 2S/3S LiPo batteries.
EASY ACCESS TO ELECTRONIC COMPONENTS
All electronics are routed and part of skid plate assembly. Simply drop the skid plate and remove the shocks at the chassis to gain access to the electronic components.
DUAL SHEAR SHOCK MOUNTS
All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
MULTIPLE SHOCK/LINK POINTS AND SWAY BAR MOUNT
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. For additional rear suspension tuning, you'll find a sway bar mount connected to the cage, under the fuel cell. Optional sway bar sold separately (AX31331).
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three pairs of black styrene helmets (motorsport, open skull-face and motocross), scale molded shock reservoirs, fuel cell, and RR10 - licensed Bomber Fabrication scale tube chassis.
FULL TUBE FRAME COMPOSITE CHASSIS
The most realistic high strength composite tube frame chassis. Our high strength composite plastic is impact resistant to help protect the RR10 from crash damage.
OPTIMIZED DRIVELINE EFFICIENCY
The YETI style transmission with RR10 specific transfer case bolts directly onto the skid plate allowing for proper driveshaft alignment required with AR60 axles.
HI-LO TRANSMISSION AND DUAL SLIPPER CLUTCH. INDUSTRY PROVEN DURABILITY, AND BRUSHLESS READY!
With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
NOTE: optional two-speed transmission component sold separately (AX31181).
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
REAR OUTPUT DIFFERENTIAL COVER
- Off-center pumpkin design
- Axle tubes are reinforced with a boxed-in axle truss
- High strength composite material
- Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
- Updated differential cover and servo mount for new look
Included with the kit but not installed, the AR60 rear output differential cover enables the opportunity to build multi-axle vehicles without costly modifications.
If you've already got a Yeti, Wraith or AX10 with AR60 axles, you can purchase this optional RR10 AR60 Axle Component Set separately: AX31317 which includes link mounts for optional shocks to be installed up front, and mounts for an optional rear sway bar.
WB8 HD WILDBOAR DRIVESHAFTS, FRONT AND REAR
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
STRONGER STEERING KNUCKLES
- 3-piece driveshaft with strengthened slider-floater tube.
- Increased surface at the connection between the ball joints and output shaft tubes.
- 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
- Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
Featuring a new design specifically for the AR60 front axle, we've updated the old knuckles by removing the steering arms and we've made them stronger by adding more material and gave them an updated, more refined look.
2.2 WALKER EVANS RACING WHEELS
Officially licensed Walker Evans Racing wheels dressed in an aggressive all black style and they work with most 2.2 tires.
SPARE TIRE AND MOUNT
Bolted onto the back is an included BFGoodrich BAJA T/A KR2 and Walker Evans 2.2 wheel/tire combo with a quick release spinner for mounting.
RECEIVER BOX, WATERPROOF
The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
TACTIC 3-CHANNEL 2.4GHz RECEIVER
The Tactic TR325 2.4GHz receiver uses no crystals and features an internal antenna, so you'll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!
35T BRUSHED MOTOR, WATER RESISTANT
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan allowing for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug 'n' go!
TACTIC TTX300 3-CHANNEL SLT RADIO
Sport-level racers and bashers will appreciate the Tactic TTX300's many popular features, along with its amazing adjustability. It features a programmable 3rd channel making for incredible versatility; it can operate functions such as two-speed shifting, winches and lights, making it ideal for a vast array of opportunities. Need more reasons? There's SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter with push-button ease.
AE-5 ESC, WATERPROOF
The Axial AE-5 ESC is 3S LiPo capable yet easily switched “in the field” between LiPO and NiMh battery types with a simple jumper - no more complex procedures.
METAL GEAR TACTIC SERVO, 151 oz-in, WATER RESISTANT
- Male Star Plug lead - compatible with the most common polarized plug in RC.
- Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
- Jumper 2 switches Drag Brake settings.
- Waterproof design with waterproof with Deans / Star Plug and laser etched heat sink.
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.
SpecificationsOverall Width (Face to Face): 11" (280mm)
Length: 22.4: (570mm)
Height: 9" (230mm)
Wheelbase: 14.75" (375mm)
Ground Clearance: 2.8" (72mm)
Weight: 6.25lbs (2.83kg)
Width: 6" (152mm)
Height: 2" (51mm)
Length: 1 1/8"-1 5/8" (29mm-42mm)
Requires2S-3S LiPo Battery with Deans plug
AA batteries for transmitter